Thermal modeling of wide bandgap materials for power MOSFETs

Mahesh B. Manandhar; Mohammad A. Matin

doi:10.1117/12.2240675

19 September 2016 Thermal modeling of wide bandgap materials for power MOSFETs

Mahesh B. Manandhar, Mohammad A. Matin

Author Affiliations +

Proceedings Volume 9957, Wide Bandgap Power Devices and Applications; 99570L (2016) https://doi.org/10.1117/12.2240675
Event: SPIE Optical Engineering + Applications, 2016, San Diego, California, United States

Abstract

This paper investigates the thermal performance of different wide bandgap (WBG) materials for their applicability as semiconductor material in power electronic devices. In particular, Silicon Carbide (SiC) and Gallium Nitride (GaN) are modeled for this purpose. These WBG materials have been known to show superior intrinsic material properties as compared to Silicon (Si), such as higher carrier mobility, lower electrical and thermal resistance. These unique properties have allowed for them to be used in power devices that can operate at higher voltages, temperatures and switching speeds with higher efficiencies. Digital prototyping of power devices have facilitated inexpensive and flexible methods for faster device development. The commercial simulation software COMSOL Multiphysics was used to simulate a 2-D model of MOSFETs of these WBG materials to observe their thermal performance under different voltage and current operating conditions. COMSOL is a simulation software that can be used to simulate temperature changes due to Joule heating in the case of power MOSFETs. COMSOL uses Finite Element/Volume Analysis methods to solve for variables in complex geometries where multiple material properties and physics are involved. The Semiconductor and Heat Transfer with Solids modules of COMSOL were used to study the thermal performance of the MOSFETs in steady state conditions. The results of the simulations for each of the two WBG materials were compared with that of Silicon to determine relative stability and merit of each material.

Citation Download Citation

Mahesh B. Manandhar and Mohammad A. Matin "Thermal modeling of wide bandgap materials for power MOSFETs", Proc. SPIE 9957, Wide Bandgap Power Devices and Applications, 99570L (19 September 2016); https://doi.org/10.1117/12.2240675

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE