Presentation
13 March 2024 83W/38fs Yb:YAG laser based on Innoslab amplifier and post pulse compressor
Author Affiliations +
Abstract
We present a chirped pulse amplification (CPA) Yb:YAG laser based on Innoslab amplifier and post pulse-compression technique to achieve an average power of 83 W at a repetition rate of 175 kH with pulse width of 38 fs. The diode laser pumped Innoslab amplifier with a plane-convex hybrid cavity efficiently suppressed the self-lasing to reach high power amplification, while achieve a nearly diffraction-limited beam quality. After the grating compressor, two stages of post-compression were used for shorter pulse width. The final compressed beam quality was characterized as M2=1.2, with a measured long time power stability of 0.28%.
Conference Presentation
© (2024) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaoyan Liang, Jie Guo, Yongxi Gao, and Zichen Gao "83W/38fs Yb:YAG laser based on Innoslab amplifier and post pulse compressor", Proc. SPIE PC12864, Solid State Lasers XXXIII: Technology and Devices, PC128640A (13 March 2024); https://doi.org/10.1117/12.3007145
Advertisement
Advertisement
KEYWORDS
Pulse signals

Pulsed laser operation

Diffraction gratings

High power lasers

Semiconductor lasers

Time metrology

Back to Top