Presentation
19 June 2024 Optical modelling and performance assessment of thin-film silicon/perovskite tandem solar cells
Author Affiliations +
Abstract
Dedicated optical models are crucial for advancing the modelling of next-generation solar cells. Incorporating various textures of different shapes and sizes into solar cells significantly improves light management. This study optimizes the optical design and predicts the performance of a novel thin-film tandem solar cell device. The top cell features a hydrogenated amorphous silicon (a-Si:H) absorber layer, while the bottom cell incorporates a low-bandgap tin-lead-based perovskite (Sn-Pb PVK) absorber layer, all supported on a flexible aluminum substrate Optical simulations exhibit 24 mA/cm² as total implied photo-current density when the absorber layer thicknesses are current-matched. The maximum absorptance reaches 80% at 500 nm for a-Si:H and only 62% at 800 nm for Sn-Pb PVK sub-cells. Experimental results show open-circuit voltages of 0.9 V for a-Si:H and 0.85 V for Sn-Pb PVK solar cells. Based on the highest achieved fill factor of 0.77, the researchers estimated a power conversion efficiency exceeding 16%.
Conference Presentation
© (2024) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Federica Saitta, Arno Smets, Lana Kessels, Rudi Santbergen, Paula Perez Rodriguez, and René Janssen "Optical modelling and performance assessment of thin-film silicon/perovskite tandem solar cells", Proc. SPIE PC13014, Photonics for Solar Energy Systems X, PC1301403 (19 June 2024); https://doi.org/10.1117/12.3017541
Advertisement
Advertisement
KEYWORDS
Silicon

Thin film solar cells

Thin films

Modeling

Solar cells

Tandem solar cells

Thin film devices

Back to Top