Open Access
5 April 2019 Full-shell x-ray optics development at NASA Marshall Space Flight Center
Author Affiliations +
Abstract
NASA’s Marshall Space Flight Center (MSFC) maintains an active research program toward the development of high-resolution, lightweight, grazing-incidence x-ray optics to serve the needs of future x-ray astronomy missions such as Lynx. MSFC development efforts include both direct fabrication (diamond turning and deterministic computer-controlled polishing) of mirror shells and replication of mirror shells (from figured, polished mandrels). Both techniques produce full-circumference monolithic (primary + secondary) shells that share the advantages of inherent stability, ease of assembly, and low production cost. However, to achieve high-angular resolution, MSFC is exploring significant technology advances needed to control sources of figure error including fabrication- and coating-induced stresses and mounting-induced distortions.
CC BY: © The Authors. Published by SPIE under a Creative Commons Attribution 4.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.
Kiranmayee Kilaru, Brian D. Ramsey, Wayne H. Baumgartner, Stephen D. Bongiorno, David M. Broadway, Patrick R. Champey, Jacqueline M. Davis, Stephen L. O'Dell, Ronald F. Elsner, Jessica A. Gaskin, Samantha A. Johnson, Jeffrey J. Kolodziejczak, Oliver J. Roberts, Douglas A. Swartz, and Martin C. Weisskopf "Full-shell x-ray optics development at NASA Marshall Space Flight Center," Journal of Astronomical Telescopes, Instruments, and Systems 5(2), 021010 (5 April 2019). https://doi.org/10.1117/1.JATIS.5.2.021010
Received: 28 November 2018; Accepted: 9 March 2019; Published: 5 April 2019
Lens.org Logo
CITATIONS
Cited by 17 scholarly publications.
Advertisement
Advertisement
KEYWORDS
Mirrors

Polishing

X-ray optics

Surface finishing

X-rays

Metrology

In situ metrology

Back to Top