1 June 1996 Compact high-efficiency nonimaging back reflector design for filament light sources
Jeffrey M. Gordon, Pang Teng Ong
Author Affiliations +
When filament light sources are used in nonimaging luminaires that are intended to ensure prescribed angular control and high optical efficiency, a 3-D back reflector must often be incorporated, so as to redirect rays emitted by the filaments that would otherwise miss the luminaire entrance aperture. The glass envelope precludes the filaments from filling the luminaire entrance aperture. The introduction of a back reflector can serve to create a virtual light source, away from the actual grid of filaments, which mitigates the problem. The back reflector should be compact, with high radiative efficiency, namely, a small number of reflections while accommodating all rays. We develop a new nonimaging back reflector design comprised of multiple rotated elliptical arcs in a rotationally symmetric device that is a good compromise.
Jeffrey M. Gordon and Pang Teng Ong "Compact high-efficiency nonimaging back reflector design for filament light sources," Optical Engineering 35(6), (1 June 1996). https://doi.org/10.1117/1.600612
Published: 1 June 1996
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflectors

Lamps

Glasses

Reflector design

Light sources

Light sources and illumination

Nonimaging optics

Back to Top