Optomechanical design and fabrication of resonant microscanners for a scanning fiber endoscope

Christopher M. Brown; Per G. Reinhall; Karasawa Satoshi; Eric J. Seibel

doi:10.1117/1.2188387

1 April 2006 Optomechanical design and fabrication of resonant microscanners for a scanning fiber endoscope

Christopher M. Brown, Per G. Reinhall, Karasawa Satoshi, Eric J. Seibel

Author Affiliations +

Optical Engineering, Vol. 45, Issue 4, 043001 (April 2006). https://doi.org/10.1117/1.2188387

Abstract

Scanning fiber optical endoscopy shows promise as a small, inexpensive imaging tool. Using this method of image acquisition, a scanning fiber is actuated at mechanical resonance, projecting a light spot across an imaged surface. Light backscattered from scanned spots is measured to form an image. The acquired image field of view, resolvable pixels, and frame rate are dependent on the dynamics of the optical fiber used as a resonant scanner. A finite-element analysis (FEA) model was constructed to predict scanning fiber dynamics, and compared with experimental results. A scanning fiber microfabrication process was developed that allows for the controlled manufacture of fiber scanners. Experimental results confirm that the theoretical model was accurate in predicting the system transfer function with less than 6% error in amplitude and less than 10% error in resonant frequency at the first two resonant modes of a cylindrical and a microfabricated fiber. The scanning fiber microfabrication process proved to be capable of repeatably etching notches in optical fibers as small as 2.00±0.05 mm in length and 15±2 µm in diameter. FEA was used to predict the effect of geometry change on microfabricated fiber scan dynamics, yielding candidate designs chosen for enhanced performance of future scanning endoscopes.

©(2006) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Christopher M. Brown, Per G. Reinhall, Karasawa Satoshi, and Eric J. Seibel "Optomechanical design and fabrication of resonant microscanners for a scanning fiber endoscope," Optical Engineering 45(4), 043001 (1 April 2006). https://doi.org/10.1117/1.2188387

Published: 1 April 2006

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE