Simultaneous analysis of edge quality parameters for submillimeter-thick silicon wafer bar with Fourier optics

Sarun Sumriddetchkajorn; Kosom Chaitavon

doi:10.1117/1.3544589

1 February 2011 Simultaneous analysis of edge quality parameters for submillimeter-thick silicon wafer bar with Fourier optics

Sarun Sumriddetchkajorn, Kosom Chaitavon

Author Affiliations +

Optical Engineering, Vol. 50, Issue 2, 023605 (February 2011). https://doi.org/10.1117/1.3544589

Abstract

This paper proposes an edge quality assessment system for a submillimeter thick wafer bar suitable for semiconductor and hard disk drive industries. Our key approach is based on Fourier optics analysis in a retro-reflective optical architecture featuring nondestructive and noncontact measurement. In our proposed design, a collimated optical beam is incident on a submillimeter thick wafer bar from its side. In this way, part of the optical beam is reflected back and is then Fourier transformed on a two-dimensional image sensor. By investigating the far-field diffraction pattern, important parameters of the wafer bar such as thickness, surface parallelism, edge parallelism, and surface defect can simultaneously be analyzed. To our knowledge, this is the first time that these important parameters are analyzed by only one system. Other key features include low cost and vibration insensitivity. Our field test study using a 635-nm wavelength laser and a 15-cm plano-convex lens for specified 246-μm thick rectangular wafer bars shows that our retro-reflective approach can measure the bar thickness within its specified ±10 μm. It can also simultaneously evaluate the remaining desired parameters and can distinguish nicely edged bars from poorly edged bars. Other key features include low cost, ease of implementation, robustness, and low component counts.

©(2011) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Sarun Sumriddetchkajorn and Kosom Chaitavon "Simultaneous analysis of edge quality parameters for submillimeter-thick silicon wafer bar with Fourier optics," Optical Engineering 50(2), 023605 (1 February 2011). https://doi.org/10.1117/1.3544589

Published: 1 February 2011

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE