Pulse position modulation for compact all-fiber vehicle laser rangefinder development

Xuesong Mao; Yongzhi Cheng; Ying Xiong; Daisuke Inoue; Manabu Kagami

doi:10.1117/1.OE.56.10.107102

12 October 2017 Pulse position modulation for compact all-fiber vehicle laser rangefinder development

Xuesong Mao, Yongzhi Cheng, Ying Xiong, Daisuke Inoue, Manabu Kagami

Author Affiliations +

Optical Engineering, Vol. 56, Issue 10, 107102 (October 2017). https://doi.org/10.1117/1.OE.56.10.107102

Abstract

We propose a method for developing small all-fiber vehicle laser rangefinders that is based on pulse position modulation (PPM) and data integration and present a theoretical study on its performance. Compared with spatial coupling, which is employed by most of the current commercial vehicle laser rangefinders, fiber coupling has the advantage that it can guide laser echoes into the interior of a car, so the electronic components following the photodiode can operate in a moderate-temperature environment. However, optical fibers have numerical apertures (NAs), which means that a laser beam from a receiving lens cannot be coupled into an optical fiber if its incident angle exceeds the critical value. Therefore, the effective size of the receiving lens is typically small since it is limited by its focal length and the NA of the fiber, causing the power of the laser echoes gathered by the receiving lens to be insufficient for performing target identification. Instead of increasing the peak transmitting laser power unrestrictedly, PPM and data integration effectively compensate for the low signal-to-noise ratio that results from the effective receiving lens size reduction. We validated the proposed method by conducting numerical simulations and performance analysis. Finally, we compared the proposed method with pseudorandom noise (PN) code modulation and found that, although the two methods perform equally well in single-target measurement scenarios, PPM is more effective than PN code modulation for multitarget measurement. In addition, PPM enables the transmission of laser beams with higher peak powers and requires less computation than PN code modulation does.

Citation Download Citation

Xuesong Mao, Yongzhi Cheng, Ying Xiong, Daisuke Inoue, and Manabu Kagami "Pulse position modulation for compact all-fiber vehicle laser rangefinder development," Optical Engineering 56(10), 107102 (12 October 2017). https://doi.org/10.1117/1.OE.56.10.107102

Received: 19 August 2017; Accepted: 21 September 2017; Published: 12 October 2017

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available