Dr. Detlef Melzer Profile

Dr. Detlef Melzer

at EQUIcon Software GmbH Jena

SPIE Involvement:

Author

Publications (7)

Proceedings Article | 17 April 2012 Paper

Pointwise process proximity function calibration: PPFexplorer application results

M. Krueger, M. Banasch, R. Galler, D. Melzer, L. Ramos, M. Suelzle, U. Weidenmueller, U. Zeitner

Proceedings Volume 8352, 83520I (2012) https://doi.org/10.1117/12.920568

KEYWORDS: Calibration, Sensors, Photoresist processing, Electron beam lithography, Cadmium, Scanning electron microscopy, Critical dimension metrology, Photomasks, Target detection, Electron beams

Read Abstract +

The semiconductor industry and mask shops spend great efforts in order to keep pace with the requirements on pattern fidelity of the ITRS lithography roadmap. Even for e-beam lithography - often referred to as technology with "unlimited" resolution - the challenges increase with shrinking feature sizes in combination with applicable resist processes. The pattern fidelity, specifically CD control, is crucial for the application of e-beam lithography. One aspect in CD control is the intrinsic proximity effect of the electron beam. This together with other contributions like influences from resist process or beam generation which are summarized altogether under the term process proximity effect have to be corrected. An accurate e-beam process proximity effect correction is therefore a key component of e-beam lithography. Some process proximity effect correction algorithms provide not only accurate correction for the process proximity effect induced pattern deformation but also optimize pattern contrast by adjusting geometry and dose simultaneously. However, the quality of the process proximity effect correction is limited by the calibration accuracy of the used model, i.e., the accuracy of the utilized process proximity function (PPF). In a previous paper [R. Galler et al, "PPF - Explorer: Pointwise Proximity Function calibration using a new radialsymmetric calibration structure", BACUS 2011] the PPF-explorer - a new experimental method for pointwise process proximity function calibration - was introduced and some first promising calibration results were shown. This paper presents the progress of the PPFexplorer proximity function calibration. This progress, among others, comprises automatic generation of calibration patterns, including pre-correction with respect to a rough forecast of the process proximity function to be calibrated. This pre-correction approach significantly reduces the number of necessary calibration structures and the number of measurement sites, without sacrificing calibration accuracy. On the contrary, the pre-correction has positive impact on the calibration quality, since it allows unifying the pattern contrast at the measurement sites, which reduces the SEM measurement induced error. We present the results of a PPFexplorer calibration with special focus on minimizing the number of measurement sites. The results show that the PPFexplorer method can help to improve the proximity effect model calibration with controllable efforts.

Proceedings Article | 14 October 2011 Paper

PPF-Explorer: pointwise proximity function calibration using a new radial symmetric calibration structure

R. Galler, M. Krueger, D. Melzer, L. Ramos, M. Suelzle, U. Weidenmueller

Proceedings Volume 8166, 81660P (2011) https://doi.org/10.1117/12.896759

KEYWORDS: Calibration, Monte Carlo methods, Electron beam lithography, Lithography, Photoresist processing, Cadmium sulfide, Scattering, Point spread functions, Critical dimension metrology, Semiconductors

Read Abstract +

Lithographic patterning encounters growing challenges to meet the requirements of current and future semiconductor technology nodes. Even e-beam lithography is challenged due to the physical characteristic of the whole transfer process including the e-beam blur, electron scattering, and resist effects. These effects cause an unavoidable blurring of the exposed shapes and are often described as process proximity effect. Besides the correction of this process proximity effect pattern contrast and process window for the lithography step have to be regarded. There are promising approaches for contrast enhancing proximity effect correction concepts. To enable a stable patterning great efforts have to be put into decreasing the errors of all involved technologies. The blurring resulting from the transfer process is usually described by a so-called process proximity function (PPF) and mostly approximated by a superposition of two or more Gaussian functions. All algorithms for proximity effect correction use that PPF to perform their correction. Thus, an accurate determination of that PPF contributes to reducing the error budget of the proximity effect correction scheme. Several methods for PPF calibration were introduced in the past. Some are based on modelling the transfer process and performing Monte Carlo simulations. Another common approach is to design and expose calibration patterns, measure the resulting CDs, and obtain the process proximity function as the result of a simulation based parameter fitting to a model function such as a sum of Gaussian functions. In order to respect the increased accuracy requirements an even more accurate description of the PPF is expected. This paper describes the newly developed PPF-explorer method for the calibration of a pointwise proximity function as a complementary technique, which is based on the exposure and evaluation of new calibration layouts. Following the common assumption that a process proximity function is radial-symmetric, we developed radial-symmetric calibration layouts.

Proceedings Article | 25 September 2010 Paper

Multi-shaped e-beam technology for mask writing

Juergen Gramss, Arnd Stoeckel, Ulf Weidenmueller, Hans-Joachim Doering, Martin Bloecker, Martin Sczyrba, Michael Finken, Timo Wandel, Detlef Melzer

Proceedings Volume 7823, 782309 (2010) https://doi.org/10.1117/12.865708

KEYWORDS: Photomasks, Vestigial sideband modulation, Beam shaping, Metals, Lithography, Electron beam lithography, Optical proximity correction, Source mask optimization, Computational lithography, Integrated optics

Read Abstract +

Proceedings Article | 15 May 2010 Paper

Modified dose correction strategy for better pattern contrast

R. Galler, D. Melzer, M. Boettcher, M. Krueger, M. Suelzle, C. Wagner

Proceedings Volume 7545, 75450F (2010) https://doi.org/10.1117/12.863376

KEYWORDS: Line width roughness, Photoresist processing, Computer simulations, Convolution, Electron beam lithography, Semiconductors, Calibration, Data processing, Data corrections, Laser scattering

Read Abstract +

All patterning technologies, including e-beam writing, encounter growing challenges to meet the requirements of current and future semiconductor technology nodes. For e-beam writing the electron proximity effect is one of the most prominent influencing factors and its optimal correction is a key for achieving sufficient pattern fidelity. Leading correction algorithms like PROXECCO® currently use a dose modulation strategy for correcting the electron proximity effect. For obtaining minimum feature sizes of below 50 nm and for most demanding patterns like dense line geometries additional correction strategies seem to be necessary to meet the pattern fidelity requirements of the semiconductor industry. The dense line geometries are so sensitive to suboptimal correction because of the achievable contrast in that case, which is minimal. The result is a small process window and an increased line width roughness (LWR). One of the possible modifications of the correction strategy is a combination of dose correction and a variation of the pattern shape. For the scope of this paper we will investigate the potential gains (contrast enhancement) and losses (increase in data prep and writing time) resulting from the so called "geometrically induced dose correction" method available in the current version of PROXECCO® integrated in the ePLACE® software package. ePLACE means eBeam Direct Write and Mask Data Preparation Layout Console and offers the ability to process layout data as well as a state-of-the-art visualization and exposure simulation capabilities. In this paper we show that especially the simulation capability can be used to reduce experimental work significantly. The "geometrically induced dose correction" method is in fact a shape size biasing operation followed by a special dose correction to meet the intended shape edges. By theoretical considerations and by applying the ePLACE® automatic simulation & measurement feature to a huge number of measurement areas we investigate the influence of the geometrically induced dose correction on exposure contrast and CD uniformity for test and real patterns. We also discuss how the geometrically induced dose correction influences the data prep time and finally the e-beam writing time.

Proceedings Article | 23 September 2009 Paper

Latest results and computing performance of the ePLACE data preparation tool

J. Gramss, R. Galler, V. Neick, A. Stoeckel, U. Weidenmueller, D. Melzer, M. Suelzle, J. Butschke, U. Baetz

Proceedings Volume 7488, 748827 (2009) https://doi.org/10.1117/12.835880

KEYWORDS: Photomasks, Beam shaping, Data conversion, Magnesium, Electron beam lithography, Data processing, Visualization, Standards development, Lithography, Computer architecture

Read Abstract +

Proceedings Article | 27 May 2009 Paper

A solution to meet new challenges on EBDW data prep

R. Galler, D. Melzer, J. Nowotny, K. Kroenert, M. Krueger, M. Suelzle, B. Papenfuss, C. Wagner, U. Baetz, B. Buerger, J. Gramss, M. Lemke

Proceedings Volume 7470, 74700S (2009) https://doi.org/10.1117/12.835190

KEYWORDS: Data processing, Computer simulations, Photomasks, Visualization, Electron beam direct write lithography, Lithography, Magnesium, Electron beams, Electron beam lithography, Algorithm development

Read Abstract +

Proceedings Article | 16 August 2002 Paper

Pattern data processing using 1-nm address grid

Juergen Gramss, Hans Eichhorn, Michael Gehre, Bernd Schnabel, Traugott Schulmeiss, Detlef Melzer, Klaus Kunze, Ulrich Baetz

Proceedings Volume 4764, (2002) https://doi.org/10.1117/12.479333

KEYWORDS: Data processing, Photomasks, Data conversion, Data modeling, Beam shaping, Medium wave, Magnesium, Microsystems, Lithography, Infrared technology

Read Abstract +

Showing 5 of 7 publications

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years