We describe the requirements and associated technology development plan for the communications data link from low mass interstellar probes. This work is motivated by several proposed deep space and interstellar missions with an emphasis on the Breakthrough Starshot project. The Starshot project is an effort to send the first low mass interstellar probes to nearby star systems and transmit back scientific data acquired during system transit within the time scale of a human lifetime. The about 104-fold increase in distance to nearby stars compared to the outer planets of our solar system requires a new form of propulsion to reach speeds of approximately 20% of the speed of light. The proposed use of a low mass sailcraft places strong constraints on the mass and power for the Starshot communications system. We compare the communications systems in current and upcoming solar system probes, New Horizons and Psyche, against the requirements for Starshot and define Figures of Merit for the communications capability in terms of data downlink rate multiplied by distance squared per unit mass. We describe current and future technology developments required for the on-board transmitter (signal generation, signal distribution, and beamforming) and for the near-Earth communications receiver (low-cost large aperture telescopes, high resolution spectrometers, and single photon counting detectors). We also describe a roadmap for technology development to meet the goals for future interstellar communications.
Over the past years, light detection and ranging (lidar) technologies have been investigated and commercialized for various applications such as autonomous vehicles, terrestrial mappings, and precision measurements. Currently, the frequently used ranging methods are the pulsed time of flight (PToF) and frequency modulated continuous wave (FMCW) lidars that relies on frequency sweeping to capture range and velocity information. We have previously developed and demonstrated the multi-tone continuous wave (MTCW) that operates by employing amplitude modulation via multiple radio frequencies (RF) and coherent detection. Here, we present a theoretical and experimental study on phase-based MTCW lidar that can detect the range and velocity of objects with arbitrary velocities. The experiments demonstrate that the phase and frequency of the Doppler-shifted fixed RF tones can be used to extract the range and velocity information in a single shot measurement. We show that a <±1cm resolution in the ranging, limited by the temporal resolution of the detection system, and a 0.5cm/s speed resolution is limited by the frequency resolution of the detection system are achievable. Moreover, the proposed approach has the potential to mitigate the requirement for a narrow linewidth laser for coherent detection.
High speed (≥1Ghz) and long distance (≥100km) data communication among CubeSats and NanoSats can accelerate the technology advancement and paves the way for critical applications such as formation flying and remote sensing. Design of a simple, lightweight optical transceiver with full duplex capability, fast-tracking speed and 360° field of regard for CubeSat is crucial due to extreme SWaP-C limitations. In this paper, we describe the design tradeoff between the field of view and collection efficiency in receiver design using Commercial off the Shelf (COTS) optics and detectors. We also briefly discussed the design tradeoffs in transmitter design for optimum performance. We show that to achieve maximum SNR at long distance(≥100km), the laser beam diameter needs to be 80%-90% of the scanning mirror diameter. In addition to that, we show that the intrinsic Field of View (FOV) of high speed(≥600MHz) Avalanche Photodiodes (APD) can be increased to ≥3° by incorporating optimized optics considering form factor of the CubeSat system. In addition, we present a scalable detector array design method using COTS components to achieve a wide full FOV(≥12°) with a uniform collection efficiency around 30%-60%. Furthermore, we demonstrated a multi-wavelength full duplex communication system based on dichroic filters as duplexer that shows significantly low crosstalk. The system also exhibits low transmission power loss(≤4%) as opposed to around 40% that of the conventional beam splitter based system.
We are developing an inter-satellite omnidirectional optical communicator (ISOC) that will enable gigabit per second data rates over distances up to 1000 km in free space. Key features of the ISOC include its high data rates and its ability to maintain multiple simultaneous links with other spacecraft. In this paper we present design considerations for the ISOC, including selection of the mission-appropriate geometry, telescope design, receiver design, as well as beam pointing considerations. We also present experimental results obtained with the ISOC prototype. In addition, we present design considerations for a low-Earth-Orbit mission where four ISOC-furnished CubeSats form a swarm suitable for remote sensing. We believe the ISOC could be a technology enabler for future constellation and formation flying CubeSat missions for Remote Sensing.
Microwave Technologies is developing a revolutionary miniature terahertz traveling-wave microtube (TTM) that will provide sub-millimeter wave radiation for many civilian and military applications. This new concept uses a dielectric microtube in conjunction with a microscopic electron beam. The electron beam is produced by a single micron-sized emitter, which lies underneath the microtube to produce high-power terahertz electromagnetic radiation. The TTM should be easily fabricated using state-of-the-art solid-state technology, and will be a pioneering step towards combining vacuum tube technology with solid-state microfabrication technology. Some of the applications for these exciting new devices include terahertz high-resolution radar, THz chemical and biological sensing, commercial THz line-of-sight networking and ultrahigh-speed computers. A key application of the device under development will be as a miniature terahertz source for biological and chemical spectroscopy. We present detailed numerical and computational analysis of this concept. We also present initial experimental testing of a dielectric microtube designed to operate at 0.1 THz. Once successfully developed, TTMs will be the basis for a new generation of high power terahertz sources capable of producing ultrahigh frequency radiation with high efficiency in an amazingly compact and lightweight package.
The Microwave-to-Optical Transformation (MOT) method is based on the Optical Admittance Diagram an optical thin film filter design tool that uses the characteristic matrix, and the quarter wave rule for the design and analysis of microwave and optical computing circuits/components. As previously reported, this technique has also been extended for characterization of the electric field strength of certain microwave devices. This paper discusses a MOT designed co-planar waveguide transition component or network for use in launching power to a new generation microwave source known as a Field Emitter Array (FEA). This paper will give a brief description of an FEA and discuss the feasibility of designing a co-planar waveguide for this particular application.
The operating principles and basic design equations of the relativistic two-stream amplifier (RTSA) are presented. A dispersion relation is obtained for two relativistic electron beams interacting with a slow wave structure for RF power extraction. A conceptual design is presented for the development of a high-power X-band RTSA.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.