![](/images/profiles/P000019525.jpg)
This will count as one of your downloads.
You will have access to both the presentation and article (if available).
OTIS has recently undergone cryogenic vacuum testing in Chamber A at Johnson Space Center in Houston, TX. A key outcome of this test was to verify there is adequate range of motion in PMSA and SMA actuators to align them to AOS/ISIM under flight-like conditions. The alignment state of the PMSAs and SMA was measured using photogrammetry and cross-checked optically using a variation of a classical Hartmann test. In the “Pass-and-a-Half” (PAAH) configuration, fiber sources near the Cassegrain focus propagate light through the full optical train and small tilts on the PMSAs create an array of spots on the science instrument detectors, mimicking the effect of a Hartmann mask. Comparison of measured and modeled spot arrays provides the alignment state of the SMA and the global tilt of the primary mirror. This paper will discuss the methodology, testing, and analysis performed to measure the alignment state of OTIS using the Hartmann method and verify the primary and secondary mirrors can be successfully aligned on orbit to meet performance requirements.
Operation of a small survey telescope in space like GESE is usually simpler than operations of large telescopes driven by the varied scientific programs of the observers or by transient events. Nevertheless, both types of telescopes share two common challenges: maximizing the integration time on target, while minimizing operation costs including communication costs and staffing on the ground. We show in the case of GESE how these challenges can be met through a custom orbit and a system design emphasizing simplification and leveraging information from ground-based telescopes.
This will count as one of your downloads.
You will have access to both the presentation and article (if available).
This course explains basic principles of design, testing and applications of freeform optics. Examples are taken from recent publications on the topic. Anyone who wants to answer questions such as, "what are freeform optics and their benefits?”, "how do I design them?", and “should I even consider freeform optics?” will benefit from taking this course.
View contact details
No SPIE Account? Create one