Deformable mirrors (DMs) have wide applications ranging from astronomical imaging to laser communications and vision science. However, they often require bulky multi-channel cables for delivering high power to their drive actuators. A low-powered DM, which is driven in a contactless fashion, could provide a possible alternative to this problem. We present a photomagnetically actuated deformable mirror (PMADM) concept, which is actuated in a contactless fashion by a permanent magnet and low-power laser heating source. We present the laboratory demonstration of prototype optical surface quality, magnetic control of focus, and COMSOL simulations of its precise photocontrol. The PMADM prototype is made of a magnetic composite (polydimethylsiloxane + ferromagnetic CrO2) and an optical-quality substrate layer and is 30.48 mm × 30.48 mm × 175 μm in dimension with an optical pupil diameter of 8 mm. It deforms to 5.76 μm when subjected to a 0.12-T magnetic flux density and relaxes to 3.76 μm when illuminated by a 50-mW laser. A maximum stroke of 8.78 μm before failure is also estimated considering a 3 × safety factor. Our work also includes simulation of astigmatism generation with the PMADM, a first step in demonstrating control of higher order modes. A fully developed PMADM may have potential application for wavefront corrections in vacuum and space environments.
Photoactive materials hold great promise for a variety of applications. We present a finite element model of light-controlled flexible magnetic composite structure composed of 33.3% Chromium dioxide (CrO2) and 66.7% Polydimethylsiloxane (PDMS) by weight. The structure has a dimension of 8 mm × 2 mm × 100 μm and has been previously experimentally studied. Due to the low Curie temperature, the structure acts as an actuator, shows significant deflection under the external magnetic field and relaxation due to laser heating. Thermal and magnetic deflection analysis has been performed using the FEM model. The simulation results show a maximum structural deflection of 6.08 mm (76% of the length of the structure) when subjected to 30 mT magnetic flux density and 160 mW laser power at 303 K (room temperature). We will present the results of the simulation model and comparison to experimental data reproducing the previously observed motion of the (CrO2+PDMS). This model will enable future fracture and fatigue analysis as well as extension to new photoactive geometries.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.