Fluid jet polishing (FJP) is a versatile method used for polishing small and complex components. The unstable removal function which is caused by the pulsation of turbulent jet is one of the main limitations for FJP. In this paper, this problem is addressed by a novel shear thickening FJP method. The shear thickening fluid (STF) is employed for preparing the polishing slurry instead of conventional Newtonian fluid. The principle of shear thickening FJP is present based on analyzing the behavior of STF under the special shear rate distribution. Then the influence of the shear thickening behavior on the material removal rate and the surface roughness of UBK7 components is investigated. The performance of the shear thickening FJP is verified detail by experiments. It is found that the shear thickening behavior would be beneficial to the surface accuracy of workpiece, owing to its ability of reducing the turbulence intensity in the boundary layers of fluid jet. Compared with normal FJP, the surface roughness of polished parts could be improved more than 40% in shear thickening FJP, while maintaining the material removal rate.
The slurry of fluid jet polishing mainly consists of deionized water and abrasives. Material removal is mostly regarded as plastic removal by the strike of the abrasives on the workpiece surface. Since jet pressure is relatively low, which result in a low material removal rate and bring a limitation of applying to this processing method. To improve the material removal rate of glass (Fused Silica, UBK7, K9, etc.), alkaline slurry was used to enhance chemical effects during polishing. Firstly, the material removal of conventional neutral slurry (pH≈7) and the new alkaline slurry (pH≈10, 11, 12, 13) were compared and the results showed that alkaline slurry brought an obvious increase in material removal rate. Then, four kinds of slurry of different alkalinity (pH≈10, 11, 12, 13) were used in polishing experiments to make clear the influence of alkaline intensity on the material removal rate. It was found that a larger material removal rate would be obtained with a higher pH slurry. Finally, the surface roughness which were made by slurry with different alkalinity were also compared, the results reached as that slurry with higher pH could bring lower surface roughness. It could be drawn from this study that enhance the chemical effects in fluid jet polishing could be an effective way to enlarge the material removal rate and improve the processing performance.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.