A. Bieler, K. Altwegg, H. Balsiger, J.-J. Berthelier, U. Calmonte, M. Combi, J. De Keyser, B. Fiethe, S. Fuselier, S. Gasc, T. Gombosi, K. Hansen, M. Hässig, A. Korth, L. Le Roy, U. Mall, H. Rème, M. Rubin, T. Sémon, V. Tenishev, C.-Y. Tzou, J. Waite, P. Wurz
KEYWORDS: Space operations, Contamination, Comets, Sensors, Monochromatic aberrations, Sun, Ions, Design for manufacturing, Spectrometers, Monte Carlo methods
Mass spectrometers are valuable tools for the in situ characterization of gaseous exo- and atmospheres and have been operated at various bodies in space. Typical measurements derive the elemental composition, relative abundances, and isotopic ratios of the examined environment. To sample tenuous gas environments around comets, icy moons, and the exosphere of Mercury, efficient instrument designs with high sensitivity are mandatory while the contamination by the spacecraft and the sensor itself should be kept as low as possible. With the Rosetta Orbiter Spectrometer for Ion and Neutral Analysis (ROSINA), designed to characterize the coma of comet 67P/Churyumov-Gerasimenko, we were able to quantify the effects of spacecraft contamination on such measurements. By means of 3D computational modeling of a helium leak in the thruster pressurization tubing that was detected during the cruise phase we examine the physics involved leading to the measurements of contamination. 3 types of contamination can be distinguished: i) Compounds from the decomposition of the spacecraft material. ii) Contamination from thruster firing during maneuvers. iii) Adsorption and desorption of the sampled environment on and from the spacecraft. We show that even after more than ten years in space the effects of i) are still detectable by ROSINA and impose an important constraint on the lower limit of gas number densities one can examine by means of mass spectrometry. Effects from ii) act on much shorter time scales and can be avoided or minimized by proper mission planning and data analysis afterwards. iii) is the most difficult effect to quantify as it changes over time and finally carries the fingerprint of the sampled environment which makes prior calibration not possible.
We report here the characteristics of noncollinear sum frequency generation in nonlinear KDP crystals by ultrashort (80 fsec) IR pulses irradiated by the intense Ti:Sapphire laser and their behavior in single shot auto-crosscorrelator (ACC) configuration. In particular we study the case where one of the beams is very weak. Our aim is to develop a procedure to provide delay time signal between light pulses for time resolved pump probe experiments based on the extraction of the phase-matched SHG spatial distribution by means of pulse shape analysis technique. We intend to apply these results to synchronize a weak short-pulse source and an intense Ti:Sapphire laser and to measure the pulse time jitter between them.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.