Paper
13 May 1994 Cell projection electron-beam lithography
Norio Saitou, Yoshio Sakitani
Author Affiliations +
Abstract
The HL-800D cell-projection e-beam lithography system was developed to meet the need for quarter-micron direct writing. It is the first commercially available cell projection system. Using the original HL-700 series concepts and Hitachi's more than 20 years of experience with HL-series manufacturing, most of the subsystems were redesigned. The HL-800D system has the following features for high-speed and accuracy: (1) a maximum beam size of 5 micrometers square with a current density of 10 A/cm2 at 50 kV acceleration; (2) a high- speed and high-accuracy, three-stage electron-beam deflection-control system; and (3) a continuous writing method to help eliminate stage-overhead time. The throughput of this system typically exceeds ten to fifteen wafers per hour for a quarter-micron pattern, though the speed depends on the total number of shots per wafer. This paper briefly describes the HL- 800D system, including its specifications, system performance data, and its potential for ULSI lithography.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Norio Saitou and Yoshio Sakitani "Cell projection electron-beam lithography", Proc. SPIE 2194, Electron-Beam, X-Ray, and Ion-Beam Submicrometer Lithographies for Manufacturing IV, (13 May 1994); https://doi.org/10.1117/12.175811
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconducting wafers

Photomasks

Lithography

Electron beam lithography

Beam shaping

Digital signal processing

Etching

RELATED CONTENT

SCALPEL mask blank fabrication
Proceedings of SPIE (August 30 1999)
A CP mask development methodology for MCC systems
Proceedings of SPIE (May 20 2006)

Back to Top