Paper
13 January 2004 Fabrication of meter-scale laser resistant mirrors for the National Ignition Facility: a fusion laser
Christopher J. Stolz, Carolyn L. Weinzapfel, Amy L. Rigatti, Jim B. Oliver, Jason Taniguchi, Ron P. Bevis, Jasbir S. Rajasansi
Author Affiliations +
Abstract
Large-aperture laser-resistant mirrors are required for the construction of the National Ignition Facility, a 1.8 MJ laser. In order to fabricate the 1408 mirrors, a development program was started in 1994 to improve coating quality, manufacturing rate, and lower unit cost. New technologies and metrology tools were scaled to meter size for facilitization in 1999 at Spectra-Physics and the Laboratory of Laser Energetics at the University of Rochester. Pilot production, to fabricate 5-10% of each component, commenced in 2001 and full production rates were achieved in 2002. Coating production will be completed in 2008 with the coating of 460 m2 of high-damage-threshold precision coatings on 100 tons of BK7 glass with yields exceeding 90%.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christopher J. Stolz, Carolyn L. Weinzapfel, Amy L. Rigatti, Jim B. Oliver, Jason Taniguchi, Ron P. Bevis, and Jasbir S. Rajasansi "Fabrication of meter-scale laser resistant mirrors for the National Ignition Facility: a fusion laser", Proc. SPIE 5193, Advances in Mirror Technology for X-Ray, EUV Lithography, Laser, and Other Applications, (13 January 2004); https://doi.org/10.1117/12.511677
Lens.org Logo
CITATIONS
Cited by 17 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Coating

National Ignition Facility

Wavefronts

Resistance

Laser induced damage

Manufacturing

Back to Top