Investigation on overplating high-aspect-ratio microstructure

Yuhua Guo; Gang Liu; Yangchao Tian

doi:10.1117/12.643650

23 January 2006 Investigation on overplating high-aspect-ratio microstructure

Yuhua Guo, Gang Liu, Yangchao Tian

Proceedings Volume 6109, Micromachining and Microfabrication Process Technology XI; 61090M (2006) https://doi.org/10.1117/12.643650
Event: MOEMS-MEMS 2006 Micro and Nanofabrication, 2006, San Jose, California, United States

Abstract

Most previous research on electroplating in LIGA has focused on electrodeposition of metal into high aspect ratio resist molds. In overplating process how the metal grows up across the top of resist molds has been relatively neglected. Typical defects like holes formation at the top of cavities of electroplated metal mold usually occur due to improper process control especially when the space/linewidth ratio of microstructure increases. To help understand these problems, overplating process has been investigated. A model is developed to compute current density distribution based on LIGA mold feature using electroplating simulation tools. Results show that it is almost an isotropic growing model at the first stage of overplating. As the deposited metal grows bigger the space between electrodes is shortened and the current density distribution along electrode may be modulated by neighbor electrode. It doesn't show an isotropic growing model any more. The deposition rate in inward lateral direction is smaller than in vertical direction. The growing model based on calculation shows that the trench feature aspect ratio can reach a considerable magnitude especially when the LIGA mold feature space/linewidth ratio increases. In poor transport situation, ion depletion becomes significant and a stopped deposition may occur thus holes can be formed at the bottom of overlapped neighbor electrodes. An optimized experiment has been performed using low overpotentials at the stage before the overlapping of neighbor electrodes and a rigorous stirring of electrolyte. A nickel mold insert without holes-formation defects can be obtained.

Citation Download Citation

Yuhua Guo, Gang Liu, and Yangchao Tian "Investigation on overplating high-aspect-ratio microstructure", Proc. SPIE 6109, Micromachining and Microfabrication Process Technology XI, 61090M (23 January 2006); https://doi.org/10.1117/12.643650

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available