Thick metal coating long- period fiber grating

Chunfang Rao; Hua Zhang; Yan Feng; Lili Xiao; Zhiqing Ye

doi:10.1117/12.952476

15 October 2012 Thick metal coating long-period fiber grating

Chunfang Rao, Hua Zhang, Yan Feng, Lili Xiao, Zhiqing Ye

Proceedings Volume 8418, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Smart Structures, Micro- and Nano-Optical Devices, and Systems; 84181Q (2012) https://doi.org/10.1117/12.952476
Event: 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2012), 2012, Xiamen, China

Abstract

This paper reports a thick nickel coating for CO₂ laser-induced long- period fiber grating (LPFG) by an electrolesselectroplating method. The thickness of the metal coating is more than 150 micrometer. As well as affording effective protection, the thick metal coating can give the LPFG enough stiffness to overcome its cross-sensitivity between bend and other measurements. In our metallization, electroless Ni-P was deposited on a bare LPFG at 86°C. We observed degradation with broadened spectrum and lessened peak value after the LPFG was electroless plated and was cooled down to room temperature. The degradation may be caused by the new metal coating instead of air and stress. Degradation was also observed in the later electroplating nickel which was induced by the stress. The mechanisms of the stress, such as thermal stress, film growing, hydrogen, and excess energy, were studied. To reduce the degradation, we took optimal plating, such as reducing the cooling speed after electroless plating, higher and stable electroplating temperature, mixing timely and proper electrodes distribution. Under the optimal condition, we got a metallized LPFG whose 3-dB bandwidth was 3.942nm, peak loss was -15.389dB, resonant wavelength was 1547.354nm, and external diameter was 0.425mm. Following temperature sensor experiments showed the metal coated LPFG presented high temperature sensitivity from 10°C to 80°C. Its temperature sensitivity was 44.9 pm/°C, and R-square was 0.9977.

Citation Download Citation

Chunfang Rao, Hua Zhang, Yan Feng, Lili Xiao, and Zhiqing Ye "Thick metal coating long-period fiber grating", Proc. SPIE 8418, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Smart Structures, Micro- and Nano-Optical Devices, and Systems, 84181Q (15 October 2012); https://doi.org/10.1117/12.952476

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available