Paper
8 February 2007 Low-threshold current low-resistance 1.3 &mgr;m InAs-InGaAs quantum-dot VCSELs with fully doped DBRs grown by MBE
Author Affiliations +
Abstract
The processing technology of 1.3&mgr;m InAs-InGaAs quantum-dot VCSELs with fully doped DBRs grown by MBE will be demonstrated. The threshold currents of the fabricated devices with 10 &mgr;m oxide-confined aperture are 0.7mA, which correspond to 890A/cm2 threshold current density. And the threshold voltage of the device is 1.03V and maximum output power is 33 &mgr;W. The series resistance is 85 &OHgr; which is 10 times lower then our preliminary work and 3 times lower then intracavity contacted InAs-InGaAs quantum-dot VCSEL. This relatively lower resistance can even comparable with the best result reported in InGaAs oxide-confined VCSELs with intracavity contact.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hsin-Chieh Yu, Jyh-Shyang Wang, Yan-Kuin Su, Shoou-Jinn Chang, Hao-Chung Kuo, Fang-I Lai, Y. H. Chang, and Hong-Pin D. Yang "Low-threshold current low-resistance 1.3 &mgr;m InAs-InGaAs quantum-dot VCSELs with fully doped DBRs grown by MBE", Proc. SPIE 6484, Vertical-Cavity Surface-Emitting Lasers XI, 64840E (8 February 2007); https://doi.org/10.1117/12.697732
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Vertical cavity surface emitting lasers

Resistance

Indium arsenide

Zinc

Modulation

Diffusion

Indium gallium arsenide

RELATED CONTENT


Back to Top