Lithography process control using scatterometry metrology and semi-physical modeling

Kevin Lensing; Jason Cain; Amogh Prabhu; Alok Vaid; Robert Chong; Richard Good; Bruno LaFontaine; Oleg Kritsun

doi:10.1117/12.711548

4 April 2007 Lithography process control using scatterometry metrology and semi-physical modeling

Kevin Lensing, Jason Cain, Amogh Prabhu, Alok Vaid, Robert Chong, Richard Good, Bruno LaFontaine, Oleg Kritsun

Proceedings Volume 6518, Metrology, Inspection, and Process Control for Microlithography XXI; 651804 (2007) https://doi.org/10.1117/12.711548
Event: SPIE Advanced Lithography, 2007, San Jose, California, United States

Abstract

In this paper, results and analysis are presented from Advanced Micro Devices' (AMD) efforts at calculating lithography dose and focus parameters using scatterometry metrology and semi-physical CD models. The system takes advantage of the accurate and precise top and bottom CD data produced by scatterometry to differentiate dose and focus variation. To build the lithography process model, scatterometry data is generated for each field of a focus-exposure matrix (FEM) wafer, and the resulting top and bottom CD data is used to fit the parameters of series expansions relating CD to dose and focus. When new CD data is generated, the models can be inverted to solve for dose and focus independently. Our methodology employs a flexible modeling and inversion approach in an attempt to make the technique applicable to any production film stack and any line spacing regime. The quality of the inversion results are highly correlated to the degree of focus observability present in the system. Our results will show how a series of litho process with varied film stacks and line/space ratios respond to this technique, and we will report some best practices for a variety of use cases ranging from equipment characterization to focus monitoring on product.

Citation Download Citation

Kevin Lensing, Jason Cain, Amogh Prabhu, Alok Vaid, Robert Chong, Richard Good, Bruno LaFontaine, and Oleg Kritsun "Lithography process control using scatterometry metrology and semi-physical modeling", Proc. SPIE 6518, Metrology, Inspection, and Process Control for Microlithography XXI, 651804 (4 April 2007); https://doi.org/10.1117/12.711548

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available