Measurement of initial absorption of fused silica at 193nm using laser induced deflection technique (LID)

Dörte Schönfeld; Ursula Klett; Christian Mühlig; Stephan Thomas

doi:10.1117/12.753081

20 December 2007 Measurement of initial absorption of fused silica at 193nm using laser induced deflection technique (LID)

Dörte Schönfeld, Ursula Klett, Christian Mühlig, Stephan Thomas

Author Affiliations +

Proceedings Volume 6720, Laser-Induced Damage in Optical Materials: 2007; 67201A (2007) https://doi.org/10.1117/12.753081
Event: Boulder Damage Symposium XXXIX: Annual Symposium on Optical Materials for High Power Lasers, 2007, Boulder, Colorado, United States

Abstract

The ongoing development in microlithography towards further miniaturization of structures creates a strong demand for lens material with nearly ideal optical properties. Beside the highly demanding requirements on homogeneity and stress induced birefringence (SIB), low absorption is a key factor. Even a small absorption is associated with a temperature increase and results in thermally induced local variations of refractive index and SIB. This could affect the achievable resolution of the lithographic process. The total absorption of the material is composed of initial absorption and of absorption induced during irradiation. Thus, the optimization of both improves the lifetime of the material. In principal, it is possible to measure transmission and scattering with a suitable spectrometer assembly and calculate absorption from them. However, owing to the influence of sample surfaces and errors of measurement, these methods usually do not provide satisfactory results for highly light-transmissive fused silica. Therefore, it is most desirable to find a technique that is capable of directly measuring absorption coefficients in the range of (1...10)•10^-4 cm^-1 (base 10) directly. We report our first results for fused silica achieved with the LID technique. Besides a fused silica grade designed for 193 nm applications, grades with higher absorption at 193 nm were measured to test the LID technique. A special focus was set on the possibility of measuring initial absorption without the influence of degradation effects.

Citation Download Citation

Dörte Schönfeld, Ursula Klett, Christian Mühlig, and Stephan Thomas "Measurement of initial absorption of fused silica at 193nm using laser induced deflection technique (LID)", Proc. SPIE 6720, Laser-Induced Damage in Optical Materials: 2007, 67201A (20 December 2007); https://doi.org/10.1117/12.753081

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available