Paper
27 November 2007 Study on the MEMS technique of flat capacitance sensor with double equipotential rings in ultra-precise optical measurement
Author Affiliations +
Abstract
Geometric measurements based on optical methods have been studied, and the capacitance sensor is applied to detect the focusing displacement. In order to improve the edge effect of the flat capacitance sensor, an equipotential ring is used. According to the Abbe principle, a double equipotential rings flat capacitance sensor with a central hole is developed. The axis of the optical system perforates through the hole of the sensor, thus avoiding the Abbe error. In order to get narrow gap between the equipotential ring and the electrode as well as thin electrodes, MEMS technique is applied to machine the capacitance electrodes, then the gap between the ring and the electrode can be no more than 10μm, meanwhile the measurement accuracy can be promoted greatly. This paper emphasizes on the design of structure flat capacitance sensor and the manufacture of double rings capacitor with MEMS technique. After completing the circuit and finishing the experiment for testing the sensor, it can make further qualitative analysis on the result of the linearity and the sensitivity.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiao-dong Yang and Jian-huan Zhang "Study on the MEMS technique of flat capacitance sensor with double equipotential rings in ultra-precise optical measurement", Proc. SPIE 6827, Quantum Optics, Optical Data Storage, and Advanced Microlithography, 682727 (27 November 2007); https://doi.org/10.1117/12.756295
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Capacitance

Electrodes

Silicon

Microelectromechanical systems

Semiconducting wafers

Photoresist materials

RELATED CONTENT

3D capacitive tactile sensor using DRIE micromachining
Proceedings of SPIE (July 01 2005)
Solder-bonded micromachined capacitive pressure sensors
Proceedings of SPIE (September 08 1998)
Surface-micromachined tunneling-based accelerometer
Proceedings of SPIE (January 16 2003)
Designing, fabrication, and test of a MEMS colloid thruster
Proceedings of SPIE (September 10 2002)
Development of a high-performance SOI-fabricated gyroscope
Proceedings of SPIE (August 11 2000)

Back to Top