Pressure sensing in vacuum hermetic micropackaging for MOEMS-MEMS

Marco Michele Sisto; Sonia García-Blanco; Loïc Le Noc; Bruno Tremblay; Yan Desroches; Jean-Sol Caron; Francis Provencal; Francis Picard

doi:10.1117/12.840931

4 February 2010 Pressure sensing in vacuum hermetic micropackaging for MOEMS-MEMS

Marco Michele Sisto, Sonia García-Blanco, Loïc Le Noc, Bruno Tremblay, Yan Desroches, Jean-Sol Caron, Francis Provencal, Francis Picard

Author Affiliations +

Proceedings Volume 7592, Reliability, Packaging, Testing, and Characterization of MEMS/MOEMS and Nanodevices IX; 759204 (2010) https://doi.org/10.1117/12.840931
Event: SPIE MOEMS-MEMS, 2010, San Francisco, California, United States

Abstract

Packaging constitutes one of the most costly steps of MEMS/MOEMS manufacturing. Uncooled IR bolometers require a vacuum atmosphere below 10 mTorr to operate at their highest sensitivity. The bolometer response is also dependent on the package temperature. In order to minimize cost, real estate and power consumption, temperature stabilization is typically not provided to the package. Hence, long term high sensitivity operation of IR bolometric radiometers requires a calibration as function of in package pressure and temperature. A low-cost and accurate means of measuring the pressure in the package without being affected by the operating temperature is therefore needed. INO has developed a low-cost, low-temperature hybrid vacuum micropackaging technology ^1-3. An equivalent flow rate of 4×10^-14 Torr·L/sec for storage at 80°C has been obtained without getter. Even with such low flow, the long term stabilization of residual pressure variations affects the sensitivity and calibration of the IR bolometers. INO has developed MEMS pressure sensors that allow for real-time measurement of package pressure above 1 mTorr, and can be integrated with the IR bolometers in a die-level packaging process or microfabricated simultaneously on the same die. In this paper, the typical performance and measurement uncertainty of these pressure sensors will be presented along with a reading method that provides a pressure measurement with a dependence on the package temperature as low as 0.7 %/°C. Complex reading circuit or temperature control of the packages are not required, making the pressure sensor well adapted for low-cost high-volume production and integration with IR bolometer arrays.

Citation Download Citation

Marco Michele Sisto, Sonia García-Blanco, Loïc Le Noc, Bruno Tremblay, Yan Desroches, Jean-Sol Caron, Francis Provencal, and Francis Picard "Pressure sensing in vacuum hermetic micropackaging for MOEMS-MEMS", Proc. SPIE 7592, Reliability, Packaging, Testing, and Characterization of MEMS/MOEMS and Nanodevices IX, 759204 (4 February 2010); https://doi.org/10.1117/12.840931

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available