1.IntroductionThe larynx serves as a complex valve within the upper aerodigestive tract.1 It brokers vital tasks, such as breathing, swallowing, and vocalizing. The larynx contains two vocal folds that drive these primary functions. The vocal folds have a unique multilayered architecture2 whose layers have discrete viscoelastic properties favorable for vocalization (Fig. 1). The vocalis muscle is covered with elastic conus (deep layer), which is composed of dense fibrous tissue, consisting of elastic fibers and collagen. These fibers and collagen are interwoven with vocalis muscle, forming a bond between the two morphologically different layers. The superficial layer is connected to the deep layer loosely through intermediate layer and can move differently from the elastic conus. The superficial layer and epithelium together form the vocal fold mucosa.3 The porcine larynx contains two types of vocal folds, similarly to humans; however, unlike the human model, they cannot be definitely addressed as “true” vocal folds and “false” vocal folds due to lack of information regarding which vocal folds play the key role in phonation.4 Vocalization is produced via mechanical oscillations of the superficial layers of the true vocal folds induced by subglottal air pressure from controlled exhalation during precisely coordinated vocal fold adduction. According to previously published research,5 lamina propria thickness is around and epithelium, which consists of multiple layers of cells,6 to depending on epithelial cell size ranging from 10 to .6,7 The vocal folds are susceptible to pathological change, which can alter their mechanical properties resulting in loss of vocal capabilities.3 Regardless of the severity of these changes, dysphonia requires accurate diagnosis and treatment. Presently, the larynx and vocal folds are clinically assessed using two-dimensional awake diagnostic laryngoscopy to identify potential pathology aided by videostroboscopy8,9 to infer elements of vocal fold vibration and pliability. Laryngeal tissue morphology and mechanical properties cannot be objectively evaluated with this technique but are rather inferred from improper oscillations of vocal folds.3 As a gold standard, definitive diagnosis of laryngeal and vocal fold anomalies requires tissue biopsy for pathological diagnosis that can lead to unintended adverse effects on voice. We propose application of Brillouin microspectroscopy as a viable and non-invasive tool to improve noninvasive diagnostic capabilities for assessing dysphonia and the vocal folds’ mechanical and morphological properties. Structural evaluation of vocal folds and their mechanical properties can be achieved with the help of more conventional imaging modalities, such as X-ray computed tomography (CT), magnetic resonance imaging (MRI), and ultrasound (US).10 While these techniques may provide accurate assessment of anatomical features11,12 and can quantify mechanical properties of vocal folds, they have several substantial drawbacks. CT imaging utilizes X-ray radiation and cannot be used for frequent measurements. MRI is limited in terms of both spatial resolution and the ability to retrieve complex mechanical properties of multilayered voice box tissues. The spatial resolution of US is insufficient for interrogating larynx’ multilayered structure. Optical coherence elastography,13 which is based on the acquisition of evolving optical coherence tomography images under external load, often lacks the desired spatial resolution and ability to characterize tissue’s viscous properties. Brillouin microspectroscopy is an emerging imaging technique built around evaluation of Brillouin scattering.14 It can potentially provide quantitative measures of vocal fold mechanical properties15,16 during common endoscopic procedures. Brillouin scattering is a type of inelastic scattering where incident photons interact with phonons within the material17,18 leading to a small change in frequency, which typically does not exceed 20 GHz in biological samples. This frequency change is called the Brillouin frequency shift and its value is related to the material’s high-frequency real elastic modulus, representing stiffness, and imaginary elastic modulus, representing viscosity. According to Vaughan and Randall,19 relation between Brillouin shifted line and mechanical properties can be described with the following equation: where is the Brillouin frequency shift value, and is the Brillouin line full width at half maximum (FWHM) value. The Brillouin frequency shift value is related to the acoustic wave velocity () as where is the refractive index of the sample, is the incident electro-magnetic (EM) radiation wavelength, and is the angle between incident and scattering directions. From this equation, the largest observed shift occurs when , which is known as backscattering geometry. Substituting Eq. (2) into both real and imaginary parts of Eq. (1) results in Eqs. (3) and (4), respectively. Real part of longitudinal modulus is defined by the following equation: where is material’s mass density. This describes the elastic modulus as proportional to Brillouin frequency shift value squared.Complex part of the high-frequency longitudinal modulus is defined by the following equation: Brillouin spectroscopic evaluation utilizes relations quantified in Eqs. (3) and (4) allowing for non-destructive label-free determination of viscoelastic properties of various materials. In the past decade, Brillouin spectroscopy has been applied to biological systems numerous times due to its inherent non-invasive and non-destructive nature. Multiple applications in the biological field were aimed at determining mechanical characteristics of different tissue types, such as superficial cancer tissues,20 neurons,21,22 eye,19,23–26 brain,27 vasculature,28 and bones.29 It was reported previously that porcine larynx shares structural similarities with human larynx, making it a suitable model for phonation pathology research.30 In this pilot study, we seek to differentiate the pliability of various porcine laryngeal subsites using Brillouin spectroscopy as a step toward potentially using this technology in the clinic. Successful evaluation and differentiation of porcine vocal fold mechanics will pave way to pathophysiology ex vivo studies of human larynx in the future. Previously published research was focused on evaluating porcine larynx structures using cyclic force application and analysis of elongation using a scientific grade ergometer.31 Here, we hypothesized that data acquired in previous studies would correlate with data acquired using a Brillouin spectrometer as described herein. To this end, we acquired a batch of porcine larynxes, tuned the system to allow for highly scattering sample imaging, and devised the experiment to remotely measure the elastic properties of excised porcine laryngeal structures using a confocal Brillouin spectrometer. The flowchart in Fig. 2 provides a graphic description of the experimental flow. As shown in Fig. 2, regions of interest were highlighted on the exposed larynx lining with a thin marker to ease the process of tracking and later statistical analysis. We targeted superior vocal fold (SVF) and inferior vocal fold (IVF) of the porcine larynx with the expectation of their mechanical properties being significantly different from surrounding tissue. The surrounding supraglottal wall (SGW) was also evaluated as comparator non-vocal fold tissue. 2.Materials and Methods2.1.Setup Description and Acquisition SettingsData were acquired in backscattering geometry using a custom-built upright confocal Brillouin microspectrometer,20,33,34 as shown in Fig. 3. Brillouin scattering was induced with 532 nm radiation, which was generated as a result of second harmonic generation in a periodically poled lithium niobate (PPLN) (Fig. 3) crystal (MSHG1064-1.0-20, Covesion Ltd.) pumped by amplified 1064 narrowband tunable single longitudinal mode laser diode (Koheras Adjustik and Koheras Boostik HPB, NKT Photonics). Optimal phase matching conditions are achieved by rotating a 1064 nm half-wave plate (HWP1) (Fig. 3) (Thorlabs). Residual 1064 nm pump is separated from the beam by means of a tilted short-pass filter (SPF) with a 750 nm cutoff wavelength and is directed toward a beam block (BB) (Fig. 3). Linearly polarized laser radiation passed through a HWP2 (Fig. 3) (Thorlabs) before entering a broadband polarizing beamsplitter (BS) cube (Fig. 3) (Thorlabs). Rotating the HWP2 allowed us to precisely control the power level at the sample. Excess 532 nm radiation transmitted through the polarization beam splitter (PBS) is diverted toward a BB (Fig. 3). A quarter-wave plate (QWP) (Fig. 3) (Thorlabs) in conjunction with the BS formed a free space circulator, which allowed us to effectively steer light to the sample and from the sample into the acquisition arm. A custom Keplerian beam expander (L3/L4, Fig. 3) was used to improve fill factor of microscope objective (O) lens (Fig. 3) entrance pupil. Microscope objective (CFI Plan Fluor 20X, 0.5 NA Nikon) was used for simultaneous delivery of of 532 nm radiation to the sample (S) (Fig. 3) and collection of scattered photons. Brillouin microspectrometer axial resolution did not exceed . It was measured using laser beam knife edging technique at the sample plane. Spot size at the same time did not exceed . These laser beam parameters were chosen for optimal combination of interrogated volume size, laser power density, spatial resolution, and low noise from backscattered photons. Collected light was guided toward a confocal pinhole assembly. Radiation was focused into a precision pinhole (PH) (Fig. 3) (National aperture) with an achromatic doublet (L5, Fig. 3) and recollimated with lens (L6, Fig. 3). Superior lateral and axial resolution of and 2 mm, respectively, was achieved through selection of sub-airy unit pinhole.35 Spatially filtered radiation was transmitted through a heated iodine vapor cell (VC) (Fig. 3) (Thorlabs).36 This provided full suppression of the elastically scattered spectral line after setting the VC temperature to 70°C, using a double pass beam propagation geometry and fine-tuning 1064 nm LD output wavelength to match the strongest absorption band of iodine. Optimal absorption was achieved at 531.9363 nm, which, according to molecular iodine vapor absorption spectra atlas,37 corresponds to line 638. Following excitation suppression, the beam was directed to a custom-built single stage virtually image phased array (VIPA) (Fig. 3) spectrometer. Free spectral range of the utilized VIPA (OP-6721-3371-2, Light Machinery Inc.) was 29.98 GHz (). Coatings on the VIPA were optimized for 532 nm applications. Cylindrical lens (CL1) (Fig. 3) (Thorlabs) and long focal distance imaging plano-convex lens (L7, Fig. 3) (Thorlabs) were chosen to allow for five orders of the spectral pattern to be imaged on the sensor. A water cooled electron-multiplying charge coupled device (EMCCD) detector camera (Andor Newton 970P, Oxford Instruments) was used to detect inelastically scattered photons at high speed. Signal to noise ratio (SNR) exceeded 3.0 for transparent homogeneous samples (acetone). The camera sensor was operating in full vertical binning mode with each acquisition lasting 100 ms. Data shifting frequency of 50 kHz was chosen to minimize readout noise. During time intervals when the sensor was processing data or waiting for command, two mechanical iris-style shutters (Thorlabs) were used to block any radiation on the sensor active area and the sample. Each imaged area was sampled 100 times in a pattern with step between the interrogated points to allow for data averaging and sample preservation. In other words, we acquired signal from a field of view, with multiple pixel overlap. Axial distance between the objective and microscope stage was fixed, meaning that topography of the tissue was not compensated for in the duration of the scan. However, sampling size, imaging depth, axial resolution, spectral filtration features, and structure of porcine larynx allow us to disregard effects of sample topography fluctuations. Each interrogated region was targeted individually to achieve highest imaging depth, which was located between 25 and . Low axial resolution of and large spot size of in diameter, allowed for elasticity averaging within a large volume of tissue. Molecular iodine absorption cell, heated to 70°C typically contaminated acquired spectra with iodine absorption lines if signal was acquired from sample boundary. This meant that to achieve clean Brillouin scattering spectra, we had to image the sample no shallower than . And porcine larynx lamina propria typically displays thickness values of . With these factors in mind, we assumed that fluctuations in topography of the sample are locally inconsequential. To find imaging position, we observed spectral data in real time and slowly lowered the objective lens to the sample. Once iodine spectral features were visible and signal was maximized, we recorded objective position since laser waist was on the boundary of the sample. We then proceeded to lower the objective down, imaging tissues deeper inside the larynx, until iodine features’ counts were smaller than Brillouin frequency shift counts. These conditions were typically met at the depth between 25 and . These values were recorded via measurement of displacement of a 3D microscope piezo stage with respect to the sample’s surface. Once position was found, lateral scanning algorithm was initiated. Imaging plane axial movement in case of an irregular surface is accounted for during signal analysis. In case iodine spectral features are prominent and saturate Brillouin spectral lines from larynx, these points are dropped from statistical analysis due to them being outside 25 to region. The same approach is employed when dealing with weak signal from beyond of depth. 2.2.Sample PreparationA post-mortem fresh pig larynx model was used in this study. This model is a viable substitution of human larynx for mechanical evaluation.2,4 Samples were sourced from 3-month-old healthy animals and purchased from Animal Biotech Industries, delivered overnight, and stored in the refrigerator at 4°C with administration of light coat of PBS to preserve superficial tissue layers. A midline vertical section was created through the larynx to allow for successful imaging of its various constituents Fig. 4(a). Accumulation of a dataset sufficient for statistical analysis, multiple separate porcine larynx samples, which are shown in Figs. 4(b)–4(e), were prepared. Three functional sites per sample were chosen for interrogation: the tissue below the true vocal folds (SGW), the true vocal folds (SVF), and the false vocal folds (IVF) [Figs. 4(b)–4(e)]. Each of the sites was sampled multiple times, and the array of dots of respective color in Figs. 4(b)–4(e) highlights each point of interest within the functional site. Interrogated points were randomly selected within the region of interest to provide a sparse coverage of the interrogated area. 2.3.Signal Processing AlgorithmAcquired spectra were stored as 1D arrays before signal processing. The first step was median filtration with a three-element kernel, which was meant to suppress impulse noise (e.g., cosmic rays). This was followed by baseline subtraction. Baseline curve was calculated via the use of an asymmetric least-squares fit algorithm [Fig. 5(a)]. The processed signal was then converted from pixel domain to the GHz domain via approximation of VIPA dispersion curve using a clear and homogeneous sample as a reference (acetone sealed in a quartz cuvette). Stokes and anti-Stokes peak pairs retrieved from the acetone sample along with the fit peak maxima positions and VIPA dispersion curve are shown in Fig. 5(b). According to previously published results,36 the dispersion curve of VIPA spectrometers can be approximated by a third order polynomial for the goal of converting pixel results to GHz with high accuracy and low computational load. Each registered peak in the spectra was fitted with a single Lorentzian curve, with the cumulative spectra being a superposition of each fit. Peak positions were recorded and used for least squares fit to a third order polynomial. At the time of the measurements on the porcine vocal folds, spectrometer performance was characterized in a form of systematic error measurement. It was approximated from 100 data points acquired from acetone at 20°C. The histogram and Gaussian fit are shown in Fig. 4. As seen in Fig. 6, value of Brillouin frequency shift value is , and mean Brillouin line FWHM value is . All the described here Brillouin measurements were performed at a fixed room temperature of 20°C. 3.Results and DiscussionCompiled results for studied laryngeal samples are presented in the figures listed below. Three laryngeal regions that were interrogated for their elastic properties are shown in Figs. 4(b)–4(e). Specific points of interrogation are highlighted as: blue dots for the IVF region, green dots for the SVF region, and red dots for the SGW region. Multiple points were measured from each region, labeled consecutively from the top as indicated by the arrows. To account for tissue heterogeneity, digital reduction of system resolution was employed. Statistical analysis of frequency shift and linewidth value data within a sampled region provided raw standard deviation values for each interrogated region. Outliers were filtered out through a combination of median filtration, statistical analysis, and smoothing of 2D value map within a sampled subregion. Total accumulated data of mean retrieved values of Brillouin frequency shift and Brillouin line width are presented as bar plots in Fig. 7. Brillouin frequency shift and Brillouin line FWHM data follow the same trend among all interrogated samples. Compiled data are shown in Table 1. The statistical significance of data from different regions was evaluated using Mann-Whitney tests. Table 1Brillouin frequency shift and Brillouin line FWHM data.
All the interrogated regions retrieved Brillouin frequency shift value distributions that were significantly different () from one another, with one exception: the difference in Brillouin frequency shift value of sample #2 SGW region was statistically insignificant compared to frequency shift value statistics of SVF and IVF region of the same sample. Brillouin line frequency shift and FWHM values retrieved from interrogated regions are visualized in Figs. 8 and 9. Number of points shown in Figs. 8 and 9 is not consistent between the regions, due to some of the points being excluded from statistical analysis. Data shown in Table 1 show the following trend.
These trends can be explained by the respective cellular structure of the laryngeal tissues and the cellular response to extracellular matrix (ECM) stiffness,38 which has also been validated using Brillouin microspectroscopy imaging.39 Taking into consideration that our level of penetration lies between 25 and , we conclude that we are interrogating the epithelial cells of laryngeal lining. The SGW region displayed the lowest Brillouin frequency shift values and lowest Brillouin line FWHM values, suggesting that this region has the highest elasticity and lowest viscosity. According to histological analysis of porcine larynx,7 this region has the largest thickness of epithelium and underlying cartilage substrate. Low values of retrieved Brillouin shifts may be explained by gradual decrease of stiffness going from cartilage superficially toward outermost layers. And due to the large thickness of the epithelium layer, this mechanical signal from ECM wanes to the softest outer layers of SGW that we observed in our study. Vocal folds, on the other hand, have been shown to have thin epithelium, attached to collagen-rich lamina propria.5 With the known imaging depth, we can interpret high Brillouin frequency shift values the following way. Epithelium cells are exposed to high-stiffness40 collagen-rich ECM, which drive cell stiffness. Such comparative Brillouin frequency shift difference may occur due to the difference in epithelium thickness or lamina propria morphology and stiffness. Previously published results were acquired using classical evaluation techniques that utilized the entire volume of excised vocal fold. Since, from the volumetric point of view, lamina propria makes up for the larger part of the total volume of vocal folds, we can infer that mechanical properties of vocal folds are driven by it. In case of our study, this means that Brillouin frequency shift difference occurs due to high lamina propria stiffness and different morphology between IVF and SVF. This also implies that due to good arrangement with previously published data, our system is indirectly evaluating lamina propria stiffness. 4.ConclusionsThe ability of Brillouin microspectroscopy to differentiate between laryngeal substructures was successfully demonstrated for the first time. The use of porcine larynx allowed for the comparison of Brillouin frequency shift values between SVF, IVF, and SGW regions of the larynx. The Brillouin frequency shift values were statistically significantly different, with SGW tissue displaying the lowest Brillouin frequency shift value, and SVF displaying the highest, in agreement with previously published results using traditional mechanical testing. While these results clearly demonstrate that porcine vocal folds can be differentiated against surrounding tissue using Brillouin frequency shift values, further study is needed. The promise of Brillouin microspectroscopy for characterizing the vocal fold mechanical properties is that it is noninvasive and can potentially be done using common endoscopic approaches for imaging the vocal folds in the office setting. If changes in the mechanical properties that correlate with vocal fold pathology can be observed with Brillouin microspectroscopy, this approach could become a powerful diagnostic tool for the laryngologist. Code, Data, and Materials AvailabilityAll data in support of the findings of this paper are available within the article. AcknowledgementsVsevolod Cheburkanov was involved in experimental design, sample preparation, data collection, data analysis, composition of the original draft, and editing. Ethan Keene and Jason Pipal were involved in sample preparation and data collection. Michael Johns, Brian E. Applegate, and Vladislav V. Yakovlev were involved in conceptualization, supervising, manuscript review, and editing. This work was partially supported by the National Science Foundation (NSF) (Grant No. CMMI-1826078); the Air Force Office of Scientific Research (AFOSR) (Grant Nos. FA9550-15-1-0517, FA9550-20-1-0366, and FA9550-20-1-0367); DOD Army Medical Research (Grant No. W81XWH2010777); the National Institutes of Health (NIH) (Grant Nos. 1R01EB027113, 1R01GM127696, 1R21GM142107, and 1R21CA269099); and the Cancer Prevention and Research Institute of Texas (CPRIT) (Grant No. RP180588). This material is also based upon work supported by the NASA, BARDA, NIH, and USFDA (Grant No. 80ARC023CA002). ReferencesJ. A. Castelijns et al.,
“Imaging of the larynx,”
Neuroimaging Clin. N. Am., 6 401
–415 NCNAEO
(1996).
Google Scholar
G. Burks, R. De Vita and A. Leonessa,
“Characterization of the continuous elastic parameters of porcine vocal folds,”
J. Voice, 34 1
–8 https://doi.org/10.1016/j.jvoice.2018.09.007 JOVOEA
(2020).
Google Scholar
M. Hirano,
“Morphological structure of the vocal cord as a vibrator and its variations,”
Folia Phoniatr., 26 89
–94 https://doi.org/10.1159/000263771
(1974).
Google Scholar
F. Alipour, S. Jaiswal and S. Vigmostad,
“Vocal fold elasticity in the pig, sheep, and cow larynges,”
J. Voice, 25 130
–136 https://doi.org/10.1016/j.jvoice.2009.09.002 JOVOEA
(2011).
Google Scholar
J. A. Garcia et al.,
“Collagen content limits optical coherence tomography image depth in porcine vocal fold tissue,”
Otolaryngol. Head Neck Surg., 155 829
–836 https://doi.org/10.1177/0194599816658005
(2016).
Google Scholar
E. Erickson-DiRenzo, C. Leydon and S. L. Thibeault,
“Methodology for the establishment of primary porcine vocal fold epithelial cell cultures,”
Laryngoscope, 129 E355
–E364 https://doi.org/10.1002/lary.27909
(2019).
Google Scholar
K. P. Manjunatha et al.,
“Histology of larynx in the pigs,”
Int. J. Chem. Stud., 6 3038
–3041
(2018).
Google Scholar
C. C. Liao et al.,
“Video laryngoscopy-assisted tracheal intubation in airway management,”
Expert Rev. Med. Devices, 15 265
–275 https://doi.org/10.1080/17434440.2018.1448267 1743-4440
(2018).
Google Scholar
L. M. Pott and W. B. Murray,
“Review of video laryngoscopy and rigid fiberoptic laryngoscopy,”
Curr. Opin. Anaesthesiol., 21 750
–758 https://doi.org/10.1097/ACO.0b013e3283184227 COAEE2
(2008).
Google Scholar
V. M. Joshi, V. Wadhwa and S. K. Mukherji,
“Imaging in laryngeal cancers,”
Indian J. Radiol. Imaging, 22 209
–226 https://doi.org/10.4103/0971-3026.107183
(2012).
Google Scholar
M. Becker et al.,
“Imaging of the larynx and hypopharynx,”
Eur. J. Radiol., 66 460
–479 https://doi.org/10.1016/j.ejrad.2008.03.027 EJRADR 0720-048X
(2008).
Google Scholar
T. Beale et al.,
“High-resolution laryngeal us: imaging technique, normal anatomy, and spectrum of disease,”
RadioGraphics, 40 775
–790 https://doi.org/10.1148/rg.2020190160
(2020).
Google Scholar
K. V. Larin and D. D. Sampson,
“Optical coherence elastography - OCT at work in tissue biomechanics [invited],”
Biomed. Opt. Express, 8 1172
–1202 https://doi.org/10.1364/BOE.8.001172 BOEICL 2156-7085
(2017).
Google Scholar
L. Brillouin,
“Diffusion de la lumière et des rayons x par un corps transparent homogène,”
Ann. Phys., 9 88
–122 https://doi.org/10.1051/anphys/192209170088
(1922).
Google Scholar
C. W. Ballmann, Z. Meng and V. V. Yakovlev,
“Nonlinear Brillouin spectroscopy: what makes it a better tool for biological viscoelastic measurements,”
Biomed. Opt. Express, 10 1750
–1759 https://doi.org/10.1364/BOE.10.001750 BOEICL 2156-7085
(2019).
Google Scholar
S. Cusack and S. Lees,
“Variation of longitudinal acoustic velocity at gigahertz frequencies with water content in rat-tail tendon fibers,”
Biopolymers, 23 337
–351 https://doi.org/10.1002/bip.360230212 BIPMAA 0006-3525
(1984).
Google Scholar
E. Gross,
“Modification of light quanta by elastic heat oscillations in scattering media,”
Nature, 129 722
–723 https://doi.org/10.1038/129722a0
(1932).
Google Scholar
E. Gross,
“Change of wave-length of light due to elastic heat waves at scattering in liquids,”
Nature, 126 201
–202 https://doi.org/10.1038/126201a0
(1930).
Google Scholar
J. M. Vaughan and J. T. Randall,
“Brillouin scattering, density and elastic properties of the lens and cornea of the eye,”
Nature, 284 489
–491 https://doi.org/10.1038/284489a0
(1980).
Google Scholar
M. Troyanova-Wood, Z. Meng and V. V. Yakovlev,
“Differentiating melanoma and healthy tissues based on elasticity-specific Brillouin microspectroscopy,”
Biomed. Opt. Express, 10 1774
–1781 https://doi.org/10.1364/BOE.10.001774 BOEICL 2156-7085
(2019).
Google Scholar
J. Zhang et al.,
“Tissue biomechanics during cranial neural tube closure measured by Brillouin microscopy and optical coherence tomography,”
Birth Defects Res., 111 991
–998 https://doi.org/10.1002/bdr2.1389
(2019).
Google Scholar
R. Schlüßler et al.,
“Mechanical mapping of spinal cord growth and repair in living zebrafish larvae by Brillouin imaging,”
Biophys. J., 115 911
–923 https://doi.org/10.1016/j.bpj.2018.07.027 BIOJAU 0006-3495
(2018).
Google Scholar
G. Scarcelli and S. H. Yun,
“Multistage VIPA etalons for high-extinction parallel Brillouin spectroscopy,”
Opt. Express, 19 10913
–10922 https://doi.org/10.1364/OE.19.010913 OPEXFF 1094-4087
(2011).
Google Scholar
G. Lepert et al.,
“Assessing corneal biomechanics with Brillouin spectro-microscopy,”
Faraday Discuss, 187 415
–428 https://doi.org/10.1039/C5FD00152H
(2016).
Google Scholar
S. Besner et al.,
“In vivo Brillouin analysis of the aging crystalline lens,”
Invest. Ophthalmol. Vis. Sci., 57 5093
–5100 https://doi.org/10.1167/iovs.16-20143 IOVSDA 0146-0404
(2016).
Google Scholar
G. Scarcelli and S. H. Yun,
“In vivo Brillouin optical microscopy of the human eye,”
Opt. Express, 20 9197
–9202 https://doi.org/10.1364/OE.20.009197 OPEXFF 1094-4087
(2012).
Google Scholar
S. Mattana et al.,
“Viscoelasticity of amyloid plaques in transgenic mouse brain studied by Brillouin microspectroscopy and correlative Raman analysis,”
J. Innov. Opt. Health Sci., 10 1742001 https://doi.org/10.1142/S1793545817420019
(2017).
Google Scholar
A. Jannasch et al.,
“Brillouin spectroscopy as an innovative tool to investigate biomechanical properties of native human aortic valve and bioprostheses tissue,”
Struct. Heart, 5 29 https://doi.org/10.1080/24748706.2021.1901535
(2021).
Google Scholar
D. Akilbekova et al.,
“Brillouin spectroscopy and radiography for assessment of viscoelastic and regenerative properties of mammalian bones,”
J. Biomed. Opt., 23 097004 https://doi.org/10.1117/1.JBO.23.9.097004 JBOPFO 1083-3668
(2018).
Google Scholar
K. A. Stevens et al.,
“Quantification of porcine vocal fold geometry,”
J. Voice, 30 416
–426 https://doi.org/10.1016/j.jvoice.2015.06.009 JOVOEA
(2016).
Google Scholar
F. Alipour-Haghighi and I. R. Titze,
“Elastic models of vocal fold tissues,”
J. Acoust. Soc. Am., 90 1326
–1331 https://doi.org/10.1121/1.401924 JASMAN 0001-4966
(1991).
Google Scholar
Z. Meng et al.,
“Assessment of local heterogeneity in mechanical properties of nanostructured hydrogel networks,”
ACS Nano, 11 7690
–7696 https://doi.org/10.1021/acsnano.6b08526 ANCAC3 1936-0851
(2017).
Google Scholar
A. J. Traverso et al.,
“Dual Raman-Brillouin microscope for chemical and mechanical characterization and imaging,”
Anal. Chem., 87 7519
–7523 https://doi.org/10.1021/acs.analchem.5b02104 ANCHAM 0003-2700
(2015).
Google Scholar
T. Wilson,
“Resolution and optical sectioning in the confocal microscope,”
J. Microsc., 244 113
–121 https://doi.org/10.1111/j.1365-2818.2011.03549.x JMICAR 0022-2720
(2011).
Google Scholar
Z. Meng and V. Yakovlev,
“Precise determination of Brillouin scattering spectrum using a virtually imaged phase array (VIPA) spectrometer and charge-coupled device (CCD) camera,”
Appl. Spectrosc., 70 1356
–1363 https://doi.org/10.1177/0003702816654050 APSPA4 0003-7028
(2016).
Google Scholar
J. D. Simmons and T. Hougen,
“Atlas of spectrum from 19 000 to ,”
J. Res. Natl. Bureau Standards A Phys. Chem., 81A 25
–80 https://doi.org/10.6028/jres.081A.006
(1977).
Google Scholar
B. Yi, Q. Xu and W. Liu,
“An overview of substrate stiffness guided cellular response and its applications in tissue regeneration,”
Bioact. Mater., 15 82
–102 https://doi.org/10.1016/j.bioactmat.2021.12.005
(2022).
Google Scholar
V. Mahajan et al.,
“Mapping tumor spheroid mechanics in dependence of 3D microenvironment stiffness and degradability by Brillouin microscopy,”
Cancers, 13 5549 https://doi.org/10.3390/cancers13215549
(2021).
Google Scholar
G. Antonacci et al.,
“Quantification of plaque stiffness by Brillouin microscopy in experimental thin cap fibroatheroma,”
J. R. Soc. Interface, 12 20150843 https://doi.org/10.1098/rsif.2015.0843 1742-5689
(2015).
Google Scholar
|
Elasticity
Spectroscopy
Tissues
Imaging spectroscopy
Biological samples
Materials properties
Iodine