Emmanuel H. Hugot is a French astrophysicist.[1] known for his contribution to the developments of new technologies that help to improve telescopes used by professional astronomers around the world. This includes the development of more efficient curved detectors, but also improvements in the manufacturing methods for optical elements and active optics systems.
The technologies developed by Hugot and his team are used on the SPHERE instrument mounted on the European Very Large Telescope, as well as the coronagraphic instrument of the future NASA's Nancy Grace Roman Space Telescope, which are used to detect exoplanets.
He is the co-founder of the SME CURVE s.a.s., which commercializes curved and freeform CMOS sensors.
The technologies developed by Hugot and his team are used on the SPHERE instrument mounted on the European Very Large Telescope, as well as the coronagraphic instrument of the future NASA's Nancy Grace Roman Space Telescope, which are used to detect exoplanets.
He is the co-founder of the SME CURVE s.a.s., which commercializes curved and freeform CMOS sensors.
This will count as one of your downloads.
You will have access to both the presentation and article (if available).
The research we present is done in the post-RST technology maturation roadmap frame. The Habitable Worlds Observatory requirements are so drastic that the performance of the stressed mirror polishing process needs to be improved to gain surface roughness.
Therefore, synthesizing nanoparticle slurries seems to be an alternative to aiming for a low roughness value. In this paper, we present the nanoparticle production process, the results obtained on the mirror prototypes we produced, and the roadmap for the production of hyperpolished OAPs.
The direct imaging of exoplanets using coronagraphic instruments provides a good example of an astronomical application that can greatly benefit from such developments. Exoplanets imaging is very demanding in terms of optical surface quality, however, the majority of coronagraphic instruments use off axis optics, which manufacturing of such optics could present some drawbacks: either the optics are cut out of a parent large mirror, resulting in a material loss, or the surfaces are machined with sub-aperture tools, resulting in high spatial frequency ripples which must be avoided for this application.
Thanks to 3D printing and topology optimisation we created an innovative warping harness design which can generate any off axis parabola shapes with only one actuator. We optimised the harness thickness distribution in order to reach non symmetrical deformation composed of astigmatism and coma. The warping is applied by micrometric screws and the high transmission factor of the system allows to keep stable the final error budget despite the error introduced by the warping harness fabricated by 3D printing. Several warping harness designs and materials were explored for the prototyping phase. This study is part of WFIRST satellite which will be launch in 2024 by NASA to observe galaxies via a wide field instrument and also perform exoplanet direct imaging via coronagraph. In the case of the WFIRST coronagraphic instrument, eight off axis parabolas are used to relay the beam from one pupil to another. We present the first prototyping results dedicated to the WFIRST off axis parabolas. Deformation surface results are performed by interferometric measurements and compared to Finite Element Analysis predictions.
We describe here the first concave curved CMOS detector developed within a collaboration between CNRS-LAM and CEA-LETI. This fully-functional detector 20Mpix (CMOSIS CMV20000) has been curved down to a radius of Rc =150mm over a size of 24x32mm2. We present here the methodology adopted for its characterization and describe in detail all the results obtained. We also discuss the main components of noise, such as the readout noise, the fixed pattern noise and the dark current. Finally we provide a comparison with the at version of the same sensor in order to establish the impact of the curving process on the main characteristics of the sensor.
This paper describes the characterization of the FAME system (freeform active mirror experiment). The system consists of a thin hydroformed face sheet that is produced to be close to the required surface shape, a highly controllable active array that provides support and the ability to set local curvature of the optical surface and the actuator layout with control electronics that drives the active array.
A detailed characterisation of the fully-assembled freeform mirror was carried out with the physical and optical properties determined by coordinate measurements (CMM), laser scanning, spherometry and Fizeau interferometry. The numerical model of the mirror was refined to match the as-built features and to predict the performance more accurately.
Each of the 18 actuators was tested individually and the results allow the generation of look-up tables providing the force on the mirror for each actuator setting. The actuators were modelled with finite element analysis and compared to the detailed measurements to develop a closed-loop system simulation. After assembling the actuators in an array, the mirror surface was measured again using interferometry. The influence functions and Eigen-modes were also determined by interferometry and compared to the FEA results.
The surface roughness on a diamond-turned AM aluminium (AlSi10Mg) mirror is presented which demonstrates the ability to achieve an average roughness of ~3.6nm root mean square (RMS) measured over a 3 x 3 grid. A Fourier transform of the roughness data is shown which deconvolves the roughness into contributions from the diamond-turning tooling and the AM build layers. In addition, two nickel phosphorus (NiP) coated AlSi10Mg AM mirrors are compared in terms of surface form error; one mirror has a generic sandwich lightweight design at 44% the mass of a solid equivalent, prior to coating and the second mirror was lightweighted further using the finite element analysis tool topology optimisation. The surface form error indicates an improvement in peak-to-valley (PV) from 323nm to 204nm and in RMS from 83nm to 31nm for the generic and optimised lightweighting respectively while demonstrating a weight reduction between the samples of 18%. The paper concludes with a discussion of the breadth of AM design that could be applied to mirror lightweighting in the future, in particular, topology optimisation, tessellating polyhedrons and Voronoi cells are presented.
An active optics system is principally composed of a deformable mirror, a wave front sensor, a set of actuators deforming the mirror and control/command electronics. It is used to correct the wave-front errors due to the optical design, the manufacturing imperfections, the large lightweight primary mirrors’ deflection in field gravity, the fixation devices, and the mirrors and structures’ thermal distortions due to the local turbulence [4]. Active optics is based on the elasticity theory [5]; forces and/or load are used to deform a mirror. Like in adaptive optics, actuators can simply be placed under the optical surface [1,2], but other configurations have also been studied: a system’s simplification, inducing a minimization of the number of actuators can be achieved by working on the mirror design [5]. For instance, in the so called Vase form Multimode Deformable Mirror [6], forces are applied on an external ring clamped on the pupil. With this method, there is no local effect due to the application of forces on the mirror’s back face. Furthermore, the number of actuators needed to warp the mirror does not depend on the pupil size; it is a fully scalable configuration.
The insertion of a Vase form Multimode Deformable Mirror on the design of an optical instrument will allow correcting the most common low spatial frequency aberrations. This concept could be applied in a space telescope. A Finite Element Analysis of the developed model has been conducted in order to characterize the system’s behavior and to validate the concept.
The RASCASSE project was commissioned by the French spatial agency (CNES) to study the SH and PD sensors for high-performance wavefront sensing. It involved ONERA and Thales Alenia Space (TAS), and LAM. Papers by TAS and LAM on the same project are available in this conference, too [1,2].
The purpose of our work at ONERA was to explore what the best performance both wavefront sensors can achieve in a space optics context. So we first performed a theoretical study in order to identify the main sources of errors and quantify them — then we validated those results experimentally.
The outline of this paper follows this approach: we first discuss phase diversity theoretical results, then Shack-Hartmann’s, then experimental results — to finally conclude on each sensor’s performance, and compare their weak and strong points.
In this paper we present preliminary studies to obtain compact focal plane arrays (FPA) for earth observations on low earth orbits at high angular resolution. Based on the principle of image slicers, we present an optical concept to arrange a 1D FPA into a 2D FPA, allowing the use of 2D detector matrices. This solution is particularly attractive for IR imaging requiring a cryostat, which volume could be considerably reduced as well as the relay optics complexity.
Enabling the use of 2D matrices for such an application offers new possibilities. Recent developments on curved FPA allows optimization without concerns on the field curvature. This innovative approach also reduces the complexity of the telescope optical combination, specifically for fast telescopes. This paper will describe the concept and optical design of an F/5 - 1.5m telescope equipped with such a FPA, the performances and the impact on the system with a comparison with an equivalent 1.5m wide field Korsch telescope.
The FAME design consists of a pre-formed, deformable thin mirror sheet with an active support system. The thin face sheet provides a close to final surface shape with very high surface quality. The active array provides the support, and through actuation, the control to achieve final surface shape accuracy.
In this paper the development path, trade-offs and demonstrator design of the FAME active array is presented. The key step in the development process of the active array is the design of the mechanical structure and especially the optimization of the actuation node positions, where the actuator force is transmitted to the thin mirror sheet. This is crucial for the final performance of the mirror where the aim is to achieve an accurate surface shape, with low residual (high order) errors using the minimum number of actuators. These activities are based on the coupling of optical and mechanical engineering, using analytical and numerical methods, which results in an active array with optimized node positions and surface shape.
Due to the opening of a new parameter space in optical design, Freeform Optics are a revolution in imaging systems for a broad range of applications from high tech cameras to astronomy, via earth observation systems, drones and defense. Freeform mirrors are defined by a non-rotational symmetry of the surface shape, and the fact that the surface shape cannot be simply described by conicoids extensions, or off-axis conicoids. An extreme freeform surface is a significantly challenging optical surface, especially for UV/VIS/NIR diffraction limited instruments.
The aim of the FAME effort is to use an extreme freeform mirror with standard optics in order to propose an integrated system solution for use in future instruments. The work done so far concentrated on identification of compact, fast, widefield optical designs working in the visible, with diffraction limited performance; optimization of the number of required actuators and their layout; the design of an active array to manipulate the face sheet, as well as the actuator design.
In this paper we present the status of the demonstrator development, with focus on the different building blocks: an extreme freeform thin face sheet, the active array, a highly controllable thermal actuator array, and the metrology and control system.
Toric mirrors and active optics: degenerated configuration for spherical monomode deformable mirrors
View contact details
No SPIE Account? Create one
