Paper
22 March 2010 Alternative resist processes for LWR reduction in EUVL
Author Affiliations +
Abstract
The main development issue for EUV resists is how to concurrently achieve high sensitivity, resolution below 22-nm half-pitch (hp), and low line width roughness (LWR) in the required fine patterns. Sensitivity and resolution continue to be improved through advances in EUV resist material research. However, through the material-approach, LWR remains a difficult issue. Thus, LWR-reduction from the point of view of alternative resist processes was investigated. As a result, LWR improvement was obtained utilizing alternative developer and rinse solutions. However, a difference in the LWR-reduction effect of these processes depending on the type of resist material used was observed.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Koji Kaneyama, Kentaro Matsunaga, Gousuke Shiraishi, Julius Joseph Santillan, and Toshiro Itani "Alternative resist processes for LWR reduction in EUVL", Proc. SPIE 7636, Extreme Ultraviolet (EUV) Lithography, 763633 (22 March 2010); https://doi.org/10.1117/12.846073
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Line width roughness

Photoresist processing

Scanning electron microscopy

Extreme ultraviolet lithography

Extreme ultraviolet

Protactinium

Semiconducting wafers

RELATED CONTENT


Back to Top