Mr. Rob DeLancey Profile

Rob DeLancey

at Synopsys Inc

SPIE Involvement:

Author

Publications (4)

Proceedings Article | 10 April 2024 Presentation + Paper

High accuracy OPC electromagnetic full-chip modeling for curvilinear mask OPC and ILT

Enas Sakr, Zac Levinson, Rob DeLancey, C. Jay Lee, Jinguang Li, Ryan Chen, Robert Iwanow, Delian Yang, Wolfgang Hoppe, Folarin Latinwo, Kevin Lucas, Peng Liu

Proceedings Volume 12954, 129540N (2024) https://doi.org/10.1117/12.3013089

KEYWORDS: Optical proximity correction, Electromagnetism, Semiconducting wafers, Extreme ultraviolet, Cadmium, 3D mask effects, Modeling, Lithography, Computational lithography, Ranging

Read Abstract +

Proceedings Article | 28 April 2023 Presentation + Paper

High accuracy OPC modeling for new EUV low-K1 mask technology options

Enas Sakr, Rob DeLancey, Wolfgang Hoppe, Zac Levinson, Robert Iwanow, Ryan Chen, Delian Yang, Kevin Lucas

Proceedings Volume 12495, 124950P (2023) https://doi.org/10.1117/12.2658720

KEYWORDS: Extreme ultraviolet, Optical proximity correction, Multilayers, Optical lithography, Modeling, 3D mask effects

Read Abstract +

EUV lithography has been ramped to successful volume manufacturing through a combination of improvements in process technology, layout design and device interactions, and also optimization of the overall product integration to reduce undesirable interactions. Because EUV has additional sources of systematic and stochastic variation that did not exist in DUV lithography, it is now even more important to have accurate predictive capability to test and understand the design and lithography process interactions. EUV-specific physical behavior such as shadowing, flare, mask topography (i.e., Mask3D) effects, mask stack reflectivity, mask absorber behavior and other effects are key differences in how EUV forms an image on the mask and subsequently on the wafer. The reflective mask substrate and EUV-specific mask absorber stack are therefore highly important technologies to optimize as the industry pushes both low NA (0.33NA) and high NA (0.55NA) technologies to cover the patterning requirements of upcoming 3nm and below technology nodes. Recently there have been substantial industry interest in optimizing EUV mask stacks to further enhance imaging behavior and achieve better pattern resolution, increase process window, lower stochastic defectivity and optimize flare. Several different options have been proposed for these new EUV mask stacks for lower K1 EUV patterning. All of these new options require excellent simulation accuracy in OPC, SrAF placement, OPC verification and ILT mask synthesis steps in order to realize the benefits of the new mask stacks. In this paper we will focus on analyzing and improving the accurate prediction of a range of new EUV mask stack options for full-chip OPC/ILT compatible compact models. We will show for advanced mask designs the accuracy requirements and capability of leading-edge compact models. The accuracy requirements and capability will be referenced to fully rigorous electromagnetic solver (e.g., Mask3D) results to ensure industry needs are met. We will also explore the mask stack options to highlight the imaging benefits for different material thickness, refractive index (n) and extinction coefficient (k) on important mask pattern feature and layer types.

Proceedings Article | 28 April 2023 Presentation + Paper

Improving OPC modeling accuracy with rigorous and compact modeling deformation effects in photoresists

Folarin Latinwo, Bernd Kuechler, Rob DeLancey, Hyesook Hong, Delian Yang

Proceedings Volume 12495, 1249508 (2023) https://doi.org/10.1117/12.2660580

KEYWORDS: Deformation, Photoresist materials, Modeling, Optical proximity correction, Shrinkage, Lithography, Optical lithography

Read Abstract +

Proceedings Article | 22 February 2021 Presentation

Increased OPC modeling accuracy of deformation effects in positive-tone development photoresists

Folarin Latinwo, Yulu Chen, Delian Yang, Rob DeLancey, Owen Huang, Kevin Lucas

Proceedings Volume 11613, 116130F (2021) https://doi.org/10.1117/12.2584781

KEYWORDS: Photoresist materials, Photoresist developing, Optical proximity correction, Optical lithography, Semiconductors, Polymers, Physics, Photoresist processing, Pollution control, Logic

Read Abstract +

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years