This will count as one of your downloads.
You will have access to both the presentation and article (if available).
We report on a pathway for Gabor domain optical coherence microscopy (GD-OCM)-based metrology to assess the donor’s corneal endothelial layers
In the 1994 paper, five classes of optical fabricators were identified; catalog, regular, select, premium, and ultimate (lithography). For each of these classes, representative minimum tolerances were published along with estimates of the cost increment. An important concept is that if any one tolerance falls into a tighter class, then the optical system must be built in a shop capitalized to provide that one minimum tolerance and as a result all the other tolerances can typically be moved to the tighter class with little cost impact. The primary cost impact then is driven by the class of shop dictated by the minimum tolerance. In this talk, a primary purpose is to revisit the tolerances associated with a given class of shop and update the numbers to reflect advances in the intervening two decades.
Traditional unobscured TMA telescopes, whose designs emerged in the mid-70s and which begin to appear as hardware in the literature in the early 90s, are based on using increasingly offset apertures with otherwise coaxial rotationally symmetric mirrors. The mirrors (typically 3 to correct spherical, coma, and astigmatism) have evolved to contain more high order terms as the designs are pushed to more compact and wider field packages – the NIRCAM camera for the JWST is an excellent example of this [1]. As the higher order terms are added, the mirrors become increasingly sensitive to decenters and tilts.
An emerging class of freeform telescopes that provide wider field of view and/or faster f/numbers than the traditional TMA are based on a strategy where the surface shape remains a low order Zernike-type surface even in compact, unobscured packages. This optical design strategy results in an optical form that is not only higher performance but simultaneously less sensitive to alignment.
This will count as one of your downloads.
You will have access to both the presentation and article (if available).
This course explains the new concepts and methods that are important when considering whether and how to incorporate freeform optical surfaces in an optical system design. A primary goal of this course is to demonstrate through examples where freeform surfaces can revolutionize an optical system design and where they cannot. Important new perspectives in optical design and analysis will be presented along with specific design methodologies. Anyone contemplating or experimenting with adding freeform surfaces to their optical design repertoire will benefit from taking this course.
View contact details
No SPIE Account? Create one
