PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
This PDF file contains the front matter associated with SPIE
Proceedings Volume 6995, including the Title Page, Copyright
information, Table of Contents, and the
Conference Committee listing.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
When using the interferometric techniques, the optical path changes induce the wavefront deformations that in turn cause
the appearance of fringes. One general characteristic of such an approach is the measurement sensitivity. The actual
sensitivity of a holographic interferometer is a function of, on one hand, the parameters of the measuring system (such as
the wavelength of the light used) and, on the other hand, the environmental conditions in which the measurements are
being made. The later depend predominately on statistical fluctuations inherent to the particular laboratory conditions. In
many applications the sensitivity is near the limits of the deformation detectability. In such cases, it is of vital interest to
increase the number of interferometric fringes thus improving the quality of the acquired data. In this paper, we give an
overview of the sensitivity increase through various experimental and numerical approaches. We also present a new
numerical iterative method in which every cycle doubles the number of interferometric fringes. The method has shown to
be especially useful in applications with sub-wavelength wavefront deformations.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
We present dual-wavelength Digital Holographic Microscopy (DHM) measurements on a certified 8.9 nm high
Chromium thin step sample and demonstrate sub-nanometer axial accuracy. We introduce a modified DHM
Reference Calibrated Hologram (RCH) reconstruction algorithm taking into account amplitude contributions.
By combining this with a temporal averaging procedure and a specific dual-wavelength DHM arrangement, it
is shown that specimen topography can be measured with an accuracy, defined as the axial standard deviation,
reduced to at least 0.9 nm. Indeed, it is reported that averaging each of the two wavefronts recorded with real-time
dual-wavelength DHM can provide up to 30% spatial noise reduction for the given configuration, thanks to
their non-correlated nature.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
In digital holography, primary holographic fringes are recorded using a matricial CCD sensor. Because of the low spatial
resolution of currently available CCD arrays, the angle between the reference and object beams must be limited to a few
degrees. Namely, due to the digitization involved, the Shannon's criterion imposes that the Nyquist sampling frequency
be at least twice the highest signal frequency. This means that, in the case of the recording of an interference fringe
pattern by a CCD sensor, the inter-fringe distance must be larger than twice the pixel period. This in turn limits the angle
between the object and the reference beams. If this angle, in a practical holographic interferometry measuring setup,
cannot be limited to the required value, aliasing will occur in the reconstructed image. In this work, we demonstrate that
the low spatial frequency metrology data could nevertheless be efficiently extracted by careful choice of twofold, and
even threefold, undersampling of the object field. By combining the time-averaged recording with subtraction digital
holography method, we present results for a loudspeaker membrane interferometric study obtained under strong aliasing
conditions. High-contrast fringes, as a consequence of the vibration modes of the membrane, are obtained.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Resolution is an important issue in inspection of objects on microscopic scale. Various approaches have been
investigated to increase the optical resolution behind the diffraction limit of an optical imaging system. Demonstration
that super-resolution is possible have been also established in interference microscopy. We have studied the possibility to
use diffraction gratings, in different experimental configurations for increasing the aperture of an optical imaging
system. The aim of the study is to demonstrate that super-resolution is possible and is a practical and viable method for a
coherent optical microscope. We take benefit of the numerical reconstruction properties of DH in combination with
diffraction grating to get super-resolution. Various attempts have been performed and results are presented and
discussed. The approaches could be used for metrology and imaging application in various fields of engineering and biology.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
In Digital Holography (DH) the numerical reconstruction of the whole wavefront refracted or reflected by a sample
object allows one to extract the wrapped phase map mod, 2π. In fact, since the hologram is coded numerically as a
digitized image, both the wavefront amplitude and phase can be reconstructed simultaneously to provide amplitude and
phase contrast imaging. The resolution in the image plane is the reconstruction pixel size that depends on wavelength,
reconstruction distance and the size of the CCD recording area. Efforts to improve the resolution of DH reconstructions
have been accomplished, following various strategies: increasing of the hologram aperture by moving the camera in
different positions or even by using synthetic aperture approaches, using a diffraction grating to record digital
holograms with a wider solid angle in the object beam, or using multiple sources and/or multiple acquisitions. Although
all of these methods allow one to increase the spatial resolution, one more complication exists concerning the loss of
resolution that occurs in the usual DH reconstruction approaches. It can occur that the reconstructed wrapped phase map
in the image plane is undersampled because of the limited pixel size which limits the spatial bandwidth of the
reconstructed image. In such a case the phase distribution cannot be retrieved correctly by the usual unwrapping
procedures. We show that the use of the digital Lateral-Shearing Interferometry (LSI) approach in DH provides the
correct reconstruction of the phase map in the image plane, even in extreme cases where the phase profile changes very
rapidly. We demonstrate the effectiveness of the method in a particular case where the profile of a highly curved silicon
micro-electromechanical system membrane has to be reconstructed.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Digital holographic microscopy permits quantitative phase contrast imaging of reflective and (partially) transparent
samples. The utilization of low coherent light sources opens up prospects for a reduced phase noise by avoiding multiple
reflections in the experimental setup. Thus, light emitting diodes (LEDs) have been investigated for applicability as low
cost light sources in digital holographic microscopy. The LEDs were characterized for the spectral properties and the
resulting coherence length. Furthermore, dispersion effects and their influences on the interferogram formation have
been analyzed. Since the interference fringe number of off-axis holograms is limited by the coherence length of the
LEDs (few micrometers) in addition to spatial phase shifting digital holographic reconstruction techniques, temporal
phase shifting procedures were applied. The characterization of the lateral and axial resolution has been performed for
both temporal and spatial phase shifting techniques by investigations on technical specimen. Finally, the application on
biological samples is demonstrated by investigations on pancreas tumor cells.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
In an adaptive measuring system the components of the optical arrangement may be changed automatically to adapt them
to the conditions of the measurement. One mayor task of these systems is to perform automatic measurements even if the
deformation is higher than the upper measuring range of the basic method. Also adaptive measuring system can help to
understand what happened with the object due to the load.
Digital holography and TV holography is the most promising tool for industrial applications. In our investigation
adaptive methods and optical elements were developed and investigated for these techniques.
Using these automatic evaluation procedures alternative output of the fringe system can be found.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Nanoscale Metrology and Sensors for Near-Field Microscopy
Sensors based on materials with high refractive indices are desirable for sensing applications where a low penetration
depth of the evanescent field into the covering analyte medium is required. To enhance the proportion of power carried
into the covering medium while keeping the penetration depth low, a waveguiding device can be coated by a high-index
film of metal oxide. We present numerical calculations as well as experimental comparisons between the evanescent
fields of titanium dioxide-coated and uncoated waveguides in lithium niobate. The experiments were performed by using
a Scanning Near-Field Optical Microscope (SNOM) in collection mode, which is an appropriate tool to measure and
characterise evanescent fields. The coating of the waveguide leads to an enhancement of the power carried out into the
covering medium by a factor 15 while the penetration depth remains the same in the range of a few 10 nm.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Integrated optic interferometric systems have been developed since many years and most of them are connected with
telecommunication. In case of our group research profile we are focused on integrated optic sensors technology. One of
possible application is the atomic force microscope (AFM). In the paper is presented the new concept that combines the
AFM with the integrated optic interferometer. In the AFM system a cantilever movement control is the most important.
The main goal of the project is improving sensitivity of the AFM by means integrated optic Michelson interferometer
(IOMI). The optical waveguide structure was fabricated by surface micromachining technique, based on sandwiched
silicon oxide and silicon oxynitride layers. The standard IOMI consist of two Y-junction in which one arm is playing the
role of reference arm and other the measuring arm. Such configuration requires four fiber-to-chip connections. Thus, in
our configuration, the integrated optic loop mirror in reference arm is fabricated. In the signal arm of our chip standard
Grin lens to form an illumination cantilever optical beam is used. In the paper some theoretical descriptions and
preliminary results are presented. The possibility of applying the heterodyned detection scheme in a IOMI as a step with
sensitivity improvement is described, also.
As the project is in progress, the paper is focused in the fabrication of the optical sensor. Next step will be optimization
of the electronic part to improve the z-axis sensitivity of the AFM.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
The Nanometer-Coordinate-Measuring-Machine (NCMM) has the ability to scan large areas at nanometer resolution for
the purpose of quality assurance of nanostructured products. The device combines a conventional atomic force
microscope (AFM) with a precise positioning system. By locating the AFM at a fixed point and moving the sample with
the positioning system a scan range of 2.5 x 2.5 x 0.5 cm3 and a repeatability of 0.1 nm is achieved. Since all movements
of the positioning system are measured via laser interferometers, the Abbe-principle is kept in every dimension, the use
of materials with a low thermal expansion coefficient (like Zerodur and FeNi36) and an overall coordinate system the
system provides unique measurement conditions (traceability to the meter definition; repeatable and fast scans of the
region of interest). In the past the NCMM was used to make the first large area scan of a microelectronic sample. Our
present work focuses on automating critical dimension measurement through the use of a-priori-knowledge of the sample
and optical navigation. A-priori-knowledge can be generated by the use of CAD-Data of the sample or scans with white
light interferometry. Another present objective is the optimization of the measurement parameters for specific sample
topologies using simulation and also empirical methods like the Ziegler-Nichols method. The need of efficient data
processing and handling is also part of our current research.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
The progress of modern nanoelectronics, optoelectronics, nanophotonics, and microoptics is determined mainly by
nanolithography advances. The electron beam lithography tools possessing a few nanometers resolution and good
flexibility have a good outlook for creation of devices of this type. From the electron beam lithography tools only tools
with sharp focused beam may be used for pattern generation over nanoscale area, but the writing speed thereof may
decrease dramatically as the beam diameter d is reduced as d--6 over this area. The theoretical analysis showed that the
application of electron beam monochromator could not only improve resolution, but increase also the beam current over
the minimum diameter area. Numerical modeling of heating process under scanning by electron beam is performed also
to fit the electron lithography systems and scanning electron microscopy. Areas of safe work with sensitive to heating
samples are determined. A conditions and prospects of development of the various electron beam lithography systems
are considered. The achievements of electron beam lithography are compared with success in the field of other
lithography techniques.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
The subject of this paper is the use of aluminum nitride (AlN) as an actuation layer in MEMS/MOEMS systems. This
material shows a good piezoelectric properties related to deposition conditions. AlN is a promising candidate for the
acoustic wave devices, MEMS applications and sensors what have been already proposed. Up to now, AlN is still a
technological challenge and many of its micromechanical and piezoelectric properties are not precisely described. That is
why our study has been focused on the determination of the material parameters like Young's modulus, residual thin film
stress, piezoelectric coefficient d31 and mechanical behaviour of especially designed cantilevers. To ensure the optimum
design, functionality and reliability of those actuators the theoretical solution and the numerical simulations of
mechanical performance by the Finite Element Method (FEM) were performed. The created model of device takes into
account multiple film stacking. For the characterization it was chosen a full-field optical technique applied in a
multifunctional interferometric platform. Proposed set-up performs the measurement in static and dynamic regimes with
nanometer sensitivity and high spatial resolution. The hybrid method of analysis combining the experimental and
numerical results has been used to better understand the properties of these microdevices, facilitate their designing and to
optimize their technological process. The optimum goal is a developing of the high quality and reliable AlN-driven
cantilevers for use in MEMS/MOEMS.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
In this paper vibration characterization of MEMS cantilevers are presented using lens-less in-line digital holographic
microscope (LDHM). In-line digital holography provides larger information capability with higher phase sensitivity,
and full CCD sensor area is utilized for real image reconstruction. In lensless in-line digital holographic microscope, a
highly diverging beam replaces the conventional microscope objectives to provide the required magnification. The
diverging wave geometry also reduces the effect of twin-image wave caused by the in-line holographic geometry. For
vibration analysis, the time averaged holograms were recorded corresponding to different vibration states of the
cantilevers. Direct numerical evaluation of the amplitude and phase information from single time averaged hologram
provides the full-field real time quantitative analysis. The experimental study of vibration measurements of Aluminum
nitride (AlN) driven cantilevers is performed. The full field study shows the simultaneous vibration behavior of many
cantilevers corresponding to same input conditions. Our study shows the shift in the resonant condition of cantilevers
both for first and second resonant frequencies. This kind of analysis is most suitable to optimize and monitoring the
fabrication process of cantilevers.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Novel modifications of an environmental scanning electron microscope (ESEM) were made in order to measure the local
deformations in drying cement paste. These nondestructively determined moisture-induced plane strains, obtained in 1
mm thick cement paste samples, are orthotropic. They vary with variations of relative humidity between 70%-80% and
40%-50%, being the highest at 20% RH. Both drying shrinkage and expansion of cement paste microstructure occur in
early-age and mature samples. Microcracking due to moisture gradient could not be avoided, although very thin samples
were examined with gradual reduction of relative humidity in drying steps of 10%. The coefficient of deformation of
cement paste is directly proportional to shrinkage/expansion. It depends on variations of relative humidity during drying
in ESEM and the sample age.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Interferometry is a powerful and versatile tool for active MEMS characterisation. The high accuracy measurement of
deformations and vibrations of MEMS structures is an important application and well described by classical
interferometry. Deformation measurements in multi-layered structures requires a more sophisticated approach. All
phase changes along the optical path of the object light influence the measurements. Thus the shape and the
displacement of obstacles (like glass cover plates) must be included to quantify the measurement results.
The paper presents numerical simulations of the light path in an interferometric deformation measurement. A ray
tracing program is developed that keeps track of the optical path length and can thus be used to analyse disturbances
along the optical path. The simulations show how the deformation of more than one interface influences the phase
measurement. The phase errors are quantified and the reliability of the deformation measurements is evaluated.
Different interface geometries are examined. The simulations are compared to measurements on a MEMS pressure
sensor.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Micro-technology plays an important role in everyday life, without being much perceived. Cell phones, for instance, are
daily equipped with small electronic components, which must have their quality level assured. New micro-metrology
techniques were developed in the last years for such purposes. They are usually only suited for measuring specific and
individual object properties (e.g. geometry, roughness, contours). A multi-sensorial approach is needed to improve the
inspection range and flexibility of a micro-production cell, so that the distinct features of different industrial parts may be
inspected intelligently and independently of their surface properties. This work provides a basic review on some of the
most important "non-contact" micro-metrology techniques (optical and non-optical), performing a comparison of these
methods among their distinct capabilities and possible industrial applications/integration scenarios. Based on the already
existent sensor fusion principles, the MEOND concept will be introduced to build up flexible inspection systems for
small series production by combining sensors and data, focusing possible application scenarios of the micro-world. The
fusion of micro-metrology techniques has not yet been far explored and is extremely important to assure flexibility,
autonomy, accuracy and robustness for the assembly of MEMS/MOEMS systems.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
High Resolution Metrology and Specialised Techniques
Today there exist different commercial micro-optics measurement instruments for the characterization of micro-optical
components and microlenses in particular. However there is often a lack of a complete quantitative optical
characterization of the latter components. Therefore we will focus in this paper on the optical characterization of all
types of refractive microlenses, more in particular spherical and aspherical microlenses. Moreover the results of the
performed round robin within the European 6th FP Network of Excellence on Micro-optics "NEMO" will allow us to
select the most appropriate instrumentation tools for characterizing refractive microlenses.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Cartilage degenerative diseases like osteoarthritis affect the organization of the biological extracellular matrix
(ECM) surrounding chondrocytes. This ECM is mainly composed by collagen giving rise to a strong Second Harmonic
Generation (SHG) Signal, due to its high non linear susceptibility.
Mechanical stress leads to perturbation of the collagen network comparable to modification occurring in
disease. To be sure that SHG signal comes specifically from the collagen network, the enzymatical action of Collagenase
was followed. We clearly noted the decrease of the collagen specific signal according to incubation time due to
enzymatic degradation.
To characterize structural modification on the arrangement of collagen fibers in the ECM, we used image
analysis based on co-occurrence matrix (Haralick). Textural features give information like homogeneity ('Angular
Second Moment') or size of textural elements ('Inverse Difference Moment', 'Correlation'). Samples submitted to
compression are characterized by higher 'Correlation', associated with a decrease of 'IDM' and 'ASM'. Those
evolutions suggest the presence of long linear structures, an effect of packing of collagen fibrils and the apparition of
nodes where the density of collagen is important versus areas showing a lack of molecules.
Collagen I, II and VI are biomarkers characterising disease states since its presence is increased in pathological
cartilage (osteoarthritis). Fluorescence Lifetime Imaging Microscopy (FLIM) associated to Spectral and SHG analysis
confirmed the presence of Collagen I and II in the extracellular and Collagen VI in the pericellular matrix of
chondrocytes.
SHG, FLIM and Spectral Imaging combined with multiphoton excitation enable tissue imaging at deep
penetration. We pointed out a local modification of the ECM of cartilage without any labelling (SHG) under mechanical
stress. Thus the association of all these techniques represents a potential diagnosis tool for disorganization of collagen.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Micro-optical components are of growing interest and used in very different applications such as displays,
biophotonics, optical-data communication... More in particular, refractive microlenses and refractive microlens
arrays are widely used. The fabrication of these components has been extensively investigated and today
different technologies are already commercially available such as thermal reflow, laser ablation, reactive ion
etching, microject printing... These technologies allow the fabrication of high-quality microlenses in different
materials, however these fabrication methods are often too expensive and too time-consuming for prototyping.
In our facilities, we implemented Deep Proton Writing (DPW) as a rapid prototyping technology to fabricate
plastic refractive microlenses and microlens arrays. To reduce the calibration time and minimize the influence of uncontrollable external parameters we built a transmission Mach-Zehnder interferometer allowing to monitor in situ and in real-time the growing of the refractive microlenses. This means that we can stop the growing process of the microlenses as soon as the predefined specifications are reached. Additionally we can determine out of this interferometric data the geometrical properties and optical quality of each of the microlenses. We have studied the precision and accuracy of our interferometer for the characterization of the latter components. In this paper, we will present the latest results showing the performance of our set-up and the resulting enhancements of our technology.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
We present in recent work release of very precise length standard based on laser frequency comb. Each frequency comb
produces a frequency spectrum with equidistant modes frep with frequency offset fceo. Stabilized frequency comb produce a very precise frequency rule. Fabry-Perot cavity is frequently used as interferometer using a scanning mirror position.
Depending on mirror coatings and reflectivity of mirrors one could obtain a spectrum of any laser adjusted to the
Fabry-Perot cavity. Two methods of length stabilization using the
Fabry-Perot cavity are presented and compared. One method
uses the cavity of mirror distance defined by νcav as an integer multiple of frep. The second is based on selection of narrow part of the spectrum and very wide inter-mode frequency νcav. Two continuous working He-Ne stabilized lasers for coarse Fabry-Perot mirror spacing length adjustment were separated by different optical polarization and one
stabilized frequency comb separated from both lasers operated at different central wavelength.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
The single point Optical Diffraction Strain Sensor has been extended to a patent-pending Multipoint Diffraction Strain
Sensor (MDSS) using a microlens array. The system was further extended for strain measurement with variable
sensitivity and measurement range. In this paper, the MDSS is shown to measure both tilt and non-uniform strain with a
sensitivity of 0.41 mε/pixel and 4.7 mrad/pixel respectively. As validation the strain measured by the MDSS is compared
with that by a micro-moiré interferometer with a Gabor filtering method for fringe pattern analysis, while the tilt is
compared with derivatives of the surface profile measured by a confocal microscope.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
We present results of measurement of purity of a set of iodine cells made at our institute. The purity was tested by
improved method based on measurement of induced fluorescence and evaluation by the Stern-Volmer formula. The
reproducibility of the fluorescence detection system was improved by introducing of additional compensation for the
pumping laser spectral and power instabilities. Frequency-doubled Nd:YAG lasers stabilized with these cells were
compared to evaluate their frequency shifts. The absolute frequencies of selected iodine hyperfine transitions were
measured in direct laser frequency comparison with the reproducibility well below the kHz level. The results indicating
the iodine cell purity are presented with relation to the absolute frequency shifts. This not only highlights the influence of
iodine cell quality onto the stability and absolute frequency of laser etalons but also shows the way towards
improvements of the iodine cell manufacturing technology.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Pupil-Plane Scanning White-Light Interferometry measures reflectivity as a function of angle of incidence, wavelength
and polarization in one location of an object surface. This information is converted into ellipsometric information and
allows the characterization of material optical properties and layer thickness in the case of layered structures. We
illustrate the capability of the method by measuring the thickness and refractive index of thin film standards. The
information is also used to create accurate 3D topography maps of complex object structures.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Fringe projection is a commonly used method for 3D surface metrology. Numerous applications have demonstrated a
measurement field from a few millimeters to several meters. To enable the measurement of micro systems with this
method, a zoom stereo microscope from Leica was used as the basis for the implementation of a fringe projection
microscope. A state of the art twisted nematic WUXGA LCD was used for flexible fringe generation. The high fill factor
of this reflective LCoS in combination with a 500 Lumen LED and a 12 bit CCD camera delivers fringe patterns with
high contrast. This allows us to measure objects with both a strong reflectivity variation and a low reflectivity. The
second main objective was to increase the measurement field and the depth of field. Using the zoom system and
exchangeable microscope objectives, the measurement fields could be changed quickly from 4 cm2 to less than 1 mm2.
Depending on the measurement field, the depth of field was between 5.22 mm and 0.018 mm. However, this was often
not sufficient to measure the complete depth of a 3D-object. The microscope system also features an integrated high
precision motor stage, which is already used for system calibration. Based on this, we implemented a new z-stitching
method where n measurements at different well determined z-positions of the motor stage were performed. The n
resulting topography maps can be stitched together to get the complete depth map of the entire object. Thus the depth
measurement range is only limited by the mechanics of the z-stage.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Within the last years, interest in photonic wires and photonic crystals grew due to their demonstrated ability
of controlling light propagation and characteristics. One of the limitations of such devices is due to the induced
roughness during the fabrication process. Generally, an increase in roughness leads to loss increase thus limiting
the propagation length and postponing the commercialization of such structures. In this paper we present a
new algorithm for measuring the sidewall roughness of our devices based on atomic force microscope (AFM)
approach. Using this algorithm, the roughness can be quantified and thus actions in decreasing it can be taken
improving the device's performance.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
The solution of the inverse problem in scatterometry, i.e. the determination of periodic surface structures from light
diffraction patterns, is incomplete without knowledge of the uncertainties associated with the reconstructed surface
parameters. With decreasing feature sizes of lithography masks, increasing demands on metrology techniques arise.
Scatterometry as a non-imaging indirect optical method is applied to periodic line-space structures in order to determine
geometric parameters like side-wall angles, heights, top and bottom widths and to evaluate the quality of the
manufacturing process. The numerical simulation of the diffraction process is based on the finite element solution of the
Helmholtz equation. The inverse problem seeks to reconstruct the grating geometry from measured diffraction patterns.
Restricting the class of gratings and the set of measurements, this inverse problem can be reformulated as a non-linear
operator equation in Euclidean spaces. The operator maps the grating parameters to the efficiencies of diffracted plane
wave modes. We employ a Gauss-Newton type iterative method to solve this operator equation and end up minimizing
the deviation of the measured efficiency or phase shift values from the simulated ones. The reconstruction properties and
the convergence of the algorithm, however, is controlled by the local conditioning of the non-linear mapping and the
uncertainties of the measured efficiencies or phase shifts. In particular, the uncertainties of the reconstructed geometric
parameters essentially depend on the uncertainties of the input data and can be estimated by various methods. We
compare the results obtained from a Monte Carlo procedure to the estimations gained from the approximative covariance
matrix of the profile parameters close to the optimal solution and apply them to EUV masks illuminated by plane waves
with wavelengths in the range of 13 nm.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Optical phase conjugation designates the "reflection" of a ray of light back into the direction from where it came. This
physical effect can be realized by sophisticated non-linear optical devices. Examples are phase conjugating mirrors based
on stimulated Brillouin scattering. Phase-conjugated mirrors are advantageous in instrument design, because they can
make an optical instrument less sensitive to misalignments or a laser resonator less sensitive to optical aberrations caused
by a phase distorting medium.
As quasi-phase-conjugated devices we might designate devices that show this special feature in an approximated way.
They can be realized with less technical and scientific effort and still offer an improvement in system stability and
instrument insensitivity. An established way to make quasi-phase-conjugated devices is by implementing arrays that are
made up of tiny retro-reflectors. These retro-reflectors may be realized using micro-lenses or tiny corner cube reflectors.
Quasi-phase-conjugated arrays have applications in optical sensors and instruments as well as in illumination
technology.
Such retrodirective arrays are analyzed from the point of view of the sensitivity of their retro-reflective properties.
Emphasis is put on considerations of geometrical device tailoring, namely on the question how the geometry of a unit
cell that is repeated in the array arrangement influences the retro-reflection properties of the optical arrangement.
A parameter study is provided that is targeting at robust retrodirective arrangements.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
A growing trend in architecture and design is the use of steel. For those applications the visual appearance of
the surface is of primordial importance. In this research we model the reflection of light on a rough steel surface,
coated with a transparent polymer layer. A number of optical non-destructive techniques were used to determine
the roughness (AFM, white light scattering interferometry) and optical constants (spectroscopic ellipsometry) of
the samples. AFM measurements were used to determine whether this polymer layer followed the roughness of
the substrate or had a roughness all of its own. Using the Modeled Integrated Scattering Tool (MIST) developed
by the National Institute of Standards and Technology (NIST) we were able to calculate the reflection of these
surfaces and compare them to experimental reflections measured by scatterometry.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
A Low Birefringence Polariscope (LBP) is developed to provide high-resolution, full-field thickness measurement of the
liquid crystal cell. By rotating the analyzer, phase shift images can be captured and analyzed to obtain the gap thickness
and uniformity of the liquid crystal cells. A comparative study with the commercial system shows good agreement. The
proposed method yields accurate and repeatable full-field measurement of the LC cell with a simple experimental setup.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
In Fourier modal methods like the RCWA and the Differential Method the Li-rules for products in truncated Fourier
space have to be obeyed in order to achieve good convergence of the results with respect to the mode number. The Lirules
have to be applied differently for parts of the field that are tangential and orthogonal to material boundaries. This is
achieved in the Differential Method by including a field of vectors in the calculation that are normal to the material
boundaries. The same can be done laterally in each layer of an RCWA calculation of a 2-D periodic structure. It turns out
that discontinuities in the normal vector field can disturb the computation especially when metallic materials are
dominant in the structure which would make the usefulness of the normal vector method questionable. So it is of great
importance to investigate how normal vector fields can be established with as few discontinuities as possible. We present
various methods for the 2-D RCWA and the 1-D and 2-D Differential Method and compare the respective convergence
behaviors. Especially we emphasize methods that are automatic and require as few user input as possible.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
We present a new method of phase retrieval from the spectral interferograms, which is based on the use of a
windowed Fourier transform applied in the wavelength domain. First, the numerical simulations are performed to
demonstrate high precision of the phase retrieval from the spectral data related to a slightly dispersive Michelson
interferometer comprising a thin-film structure. Second, the feasibility of the method is confirmed in processing
experimental data from the Michelson interferometer with SiO2 thin film on a silicon wafer to determine precisely
the thin-film thickness. We confirm very good agreement with the previous results obtained by the fitting of the
recorded spectral interferograms to the theoretical ones. Finally, the method is used in processing experimental
data from the Michelson interferometer with two metallic mirrors. From the retrieved phase function, the effective
thickness of the beamsplitter made of BK7 glass is determined precisely.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
In this paper, we present a phase retrieval method where a sequence of diffraction speckle intensities, recorded by tuning
the illumination wavelength, is used. These recordings, combined with an iterative calculation method, allow the
reconstruction of the amplitude and the phase of the wavefront. The main advantages of this method are: simple optical
setup and high immunity to noise and environmental disturbance, since no reference beam or additional moving parts are
needed. Furthermore, this method allows for an extended wrap-free phase measurement range by using synthetic
wavelengths. The technique shows great potential in some fields of micro-metrology, such as lensless phase contrast
imaging and wavefront sensing.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
This paper proposes a Fourier-Optics-based non-invasive quality assessment tool for a micron-thick bar. Our design
concept relies on a transmissive optical architecture to reduce the effect of an object's angle misalignment that can
introduce a significant measurement error. From the far-field diffraction pattern of the micron-thick bar, we determine its
thickness from the distance either between the two adjacent diffracted order beams or between a high order diffracted
beam and the zero order beam. In addition, because all diffracted order beams are aligned, we use the resulting slope to
determine the edge parallelism. The amount of edge defect on the sample can be investigated by evaluating the
distribution of the optical intensity inside diffracted order beams. Our theoretical analysis indicates that for a 238-μm
thick bar, our proposed concept provides better than 1 μm and 0.1° resolutions in thickness and edge parallelism
measurements. Our experiment using a 635-nm wavelength laser diode and 22 sample bars with an average thickness of
238-μm shows that our approach can simultaneously evaluate the thickness and the edge parallelism of the bar samples
as well as distinguish nicely edged bars from poorly edged bars. Key features include low cost, ease of implementation,
robustness, and low component counts.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Aspheric lenses are of increasing importance in compact imaging systems. New developments in production
technologies have led to the so called wafer level production with several thousands of lenses on a single wafer.
This high volume production demands fast testing equipment which allows for the characterization of complete imaging
systems as well as of all of its single components. In most of the cases conventional methods cannot be used to measure
single lenses or objectives in earlier production states. Although e.g. the measurement of the modulation transfer
function is a well established method for fast and accurate quality inspection of entire objectives it has its limitation for
single lenses.
Due to its very large dynamic range the Shack-Hartmann sensor is able to measure a very broad range of spherical and
aspherical lenses as well as partially or fully assembled objectives. With the combination of a fast high accuracy
wavefront sensor and special positioning algorithms which allow for high throughput in mass production a new flexible
instrument has been developed.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
When a signal is sampled at a rate less than twice its maximum frequency aliasing is occurred, which causing lower
frequencies to appear in the sampled signal. In displaying an image on a monitor we also performing a kind of sampling.
Displaying a sinusoidal image, with a frequency that is approximately an integer multiple of pixel frequency of the
monitor, generates a frequency that is very smaller than the frequency of presented image that appears as a moire fringe.
Characteristics of this fringe depend on the pixel size of the monitor and the frequency of the displayed image. By
changing the image frequency one can access a moire fringe of infinite period. In this case there is a simple relation
between the image period and the pixel period of the monitor. Thus by knowing the period of the presented image, the
period of the pixels can be obtained using this relation. The error in determining the number of the pixels of a monitor is
estimated to be less than one pixel.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
We present a numerical technique for refocusing and three-dimensional localization of micron-size particles observed
in a digital holographic microscope working in transmission. We use Fourier method for the extraction of
complex amplitude from the single exposition digital holograms. The three dimensional localization of objects is
performed using the focus plane determination method based on the integrated amplitude modulus. We apply
the refocusing criterion locally for each pixel, using small overlapping windows, in order to obtain a synthetic
image in which all objects are refocused independent from their refocusing distance. We perform image segmentation
and object detection using both the synthetic refocused image and the value of refocusing criterion,
which allows us to obtain a high detection efficiency with very low number of false detections. While the lateral
precision of localization is determined by the optical resolution of the setup, the vertical accuracy depends on
the parameters of the digital holographic reconstruction. We improve the accuracy of vertical localization using
an additional refining procedure in which each particle is treated separately. We analyze the robustness and
accuracy of our approach and present its successful implementation in particle flow experiments.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
The structure and optical properties of the heterostructures, which contain an ultra-thin InGaN layers with GaN
or AlGaN barriers, grown by MOCVD method were investigated by photoluminescence and high resolution X-ray
diffraction (HRXRD) tehnigue. The exciton localization energy, Urbah energy and charge carries activation energies
were obtained from analysis of the temperature dependences of the photoluminescence spectra for the In-rich areas
(QDs). In these structures the In-rich areas are shown to appear in ultrathin InGaN layers due to phase decomposition.
That leads to exciton and carrier localization in fluctuation minima, which prevents them from tranport to nonradiative
recombination centres. The indium composition in the InGaN QDs were obtained using theoretical model, which
describes the electron transition energy as a function of In-rich areas parameters. The parameters such as deformation of
InGaN/GaN region and layer thickness were determined from HRXRD. The suggested approach is supposed to be
effective method for analysis of the optical properties of InGaN/GaN heterostructures.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Nanoindentation testing has proved to be an effective tool to determine the mechanical properties of small volumes of
materials applied in various micro-systems, including hardness, indentation modulus, creep and so on. Nowadays, with
the help of advanced numerical methods, especially the finite element analysis (FEA) technique, further mechanical
properties of the material under test (e.g. tensile strength, etc.) can be interpreted from the typical indentation curve.
However, the reliability and accuracy of these analytical models have to be well tested.
Recently, the deformed topography of the interlayer surface within the tip-film-substrate system has been proposed to be
the reference for the evaluation of FEA and other mathematic models for indentation testing. Here an in-situ interlayer
deformation imaging system based on differential confocal microscopy is therefore developed, which has the capability
to measure in-situ the real-time topography deformation within a layered specimen during nanoindentation testing.
By means of linear regression and interpolation of the linear region of the standard confocal microscopy, differential
confocal microscopy (DCM) can achieve a very high resolution for topography measurements. However, the actual
capability and measurement uncertainty of DCM would be subject to those common-mode error sources like surface
heterogeneity, intensity fluctuation of the light source, etc. In this paper an improved DCM is proposed, which
introduces an additional point detector to the conventional DCM, creating dual confocal signals with slight relative axial
shifting. The real topography of the surface under test can then be easily deconvoluted from the dual differential signals,
whilst the common-mode errors within the measurement are eliminated.
A prototype was developed and applied for measuring a step-height composed of two different materials and for in-situ
inspection of the interlayer deformation during nanoindentation testing. Preliminary experimental results verify the
feasibility and accuracy of the proposed method.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
In this paper we present optical phase-conjugation based on the degenerate four-wave mixing (DFWM) arrangement in
photorefractive crystal. The 532nm beam from a low-power Nd:Yag laser was split to form two counter-propagating
pump beams and one probe beam in the DFWM geometry. Experiments were carried out by varying the parameters
(angle of separation between the forward-pump and the probe beam, writing beam intensities) that influence the phase-conjugate
beam reflectivity. High reflectivity optical phase-conjugation is hereby reported for low-power lasers. The
dependence of phase conjugate reflectivity on signal to pump ratio (m) and forward to backward pump ratio (q) have
been investigated experimentally
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.